Abstract:Organic field‐effect transistors (OFETs) based on two‐dimensional (2D) monolayer organic semiconductors (OSC) have demonstrated promising potentials for various applications, such as light emitting diode (LED) display drivers, logic circuits, and wearable electrocardiography (ECG) sensors. To date, the fabrications of this class of highly crystallized 2D organic semiconductors (OSC) are dominated by solution shearing. As these organic active layers are only a few molecular layers thick, their compatibilities with conventional thermal evaporated top electrodes or sophisticated photolithography patterning are very limited, which also restricts their device density. Here, we develop an electrode transfer stamp and a semiconductor patterning stamp to fabricate OFETs with channel lengths down to 3 μm over a large area without using any chemicals or causing any damage to the active layer. Two‐dimensional (2D) 2,9‐didecyldinaphtho[2,3‐b:2′,3′‐f]thieno[3,2‐b]thiophene (C10‐DNTT) monolayer OFETs developed by this new approach shows decent performance properties with a low threshold voltage (VTH) less than 0.5 V, intrinsic mobility higher than 10 cm2 V−1 s−1 and a subthreshold swing (SS) less than 100 mV dec−1. The proposed patterning approach is completely comparable with ultra‐flexible parylene substrate less than 2 μm thick. By further reducing the channel length down to 2 μm and using the monolayer OFET in an AC/DC rectifying circuit, the measured cutoff frequency is up to 17.3 MHz with an input voltage of 4 V. The newly proposed electrode transfer and patterning stamps have addressed the long‐lasting compatibility problem of depositing electrodes onto 2D organic monolayer and the semiconductor patterning. It opens a new path to reduce the fabrication cost and simplify the manufacturing process of high‐density OFETs for more advanced electronic or biomedical applications. This article is protected by copyright. All rights reserved

Controllable Self-Assembly of PTCDI-C8 for High Mobility Low-Dimensional Organic Field-Effect Transistors

High Electrical Conductivity and Carrier Mobility in Ocvd PEDOT Thin Films by Engineered Crystallization and Acid Treatment

Single Mesowire Transistor from Perylene Tetracarboxylic Diimide

Solution-processed, Self-organized Organic Single Crystal Arrays with Controlled Crystal Orientation

Patterning 2D Organic Crystalline Semiconductors Via Thermally Induced Self‐Assembly

Directly Patterning Conductive Polymer Electrodes on Organic Semiconductor via In Situ Polymerization in Microchannels for High-Performance Organic Transistors

High-resolution patterning of organic semiconductor single crystal arrays for high-integration organic field-effect transistors

A Dewetting-Induced Assembly Strategy for Precisely Patterning Organic Single Crystals in OFETs.

Liquid Crystal-Like Active Layer for High-Performance Organic Field-Effect Transistors

Laterally Expanded Rylene Diimides with Uniform Branched Side Chains for Solution-Processed Air Stable N-Channel Thin Film Transistors

Solution-Processed, Large-Area, Two-Dimensional Crystals of Organic Semiconductors for Field-Effect Transistors and Phototransistors

Air‐stable Perylene Diimide Trimer Material for n‐type Organic Electrochemical Transistors

Ultralow contact resistance in organic transistors via orbital hybridization

Dry Lithography Patterning of Monolayer Flexible Field Effect Transistors by 2D Mica Stamping

High performance n-channel thin-film field-effect transistors based on angular-shaped naphthalene tetracarboxylic diimides

Improving Charge Injection for Organic Field‐Effect Transistor Array via Chemical Functionalized Van der Waals Top‐Contacts

Organic Semiconductor Crystal Engineering for High‐Resolution Layer‐Controlled 2D Crystal Arrays

Challenging Bendable Organic Single Crystal and Transistor Arrays with High Mobility and Durability towards Flexible Electronics

Controlled 2D growth of organic semiconductor crystals by suppressing “coffee-ring” effect

High Mobility, Air Stable, Organic Single Crystal Transistors of an N-Type Diperylene Bisimide

Optimization of Alkyl Side Chain Length in Polyimide for Gate Dielectrics to Achieve High Mobility and Outstanding Operational Stability in Organic Transistors