Abstract:In this study, we mainly focus on the structural morphology and inter-atomic bonding state of tribofilms resulting from a highly-hydrogenated amorphous carbon (a-C:H) film in order to ascertain the underlying mechanisms for its superlubric behavior (i.e., less than 0.01 friction coefficient). Specifically, we achieved superlubricity (i.e., friction coefficients of down to 0.003) with this film in dry nitrogen and argon atmospheres especially when the tribo-pair is made of an a-C:H coated Si disk sliding against an a-C:H coated steel ball, while the a-C:H coated disk against uncoated ball does not provide superlubricity. We also found that the state of superlubricity is more stable in argon than in nitrogen and the formation of a smooth and uniformly-thick carbonaceous tribofilm appears to be one of the key factors for the realization of such superlubricity. Besides, the interfacial morphology of sliding test pairs and the atomic-scale bond structure of the carbon-based tribofilms also play an important role in the observed superlubric behavior of a-C:H films. Using Raman spectroscopy and high resolution transmission electron microscopy, we have compared the structural differences of the tribofilms produced on bare and a-C:H coated steel balls. For the a-C:H coated ball as mating material which provided superlow friction in argon, structural morphology of the tribofilm was similar or comparable to that of the original a-C:H coating; while for the bare steel ball, the sp2-bonded C fraction in the tribofilm increased and a fingerprint-like nanocrystalline structure was detected by high resolution transmission electron microscopy (HRTEM). We also calculated the shear stresses for different tribofilms, and established a relationship between the magnitude of the shear stresses and the extent of sp3-sp2 phase transformation.

Ultra‐low Friction of Fluorine‐doped Hydrogenated Carbon Film with Curved Graphitic Structure

Fullerene-like Nanostructure Induced Excellent Friction Behavior in High Vacuum Environment for Hydrogenated Carbon Film

Understanding the Ultra-Low Friction Behavior of Hydrogenated Fullerene-Like Carbon Films Grown with Different Flow Rates of Hydrogen Gas

Structural, Mechanical and Tribological Behavior of Fullerene-Like Carbon Film

Lower friction and higher wear resistance of fluorine-incorporated amorphous carbon films

Hydrophobic, Mechanical, and Tribological Properties of Fluorine Incorporated Hydrogenated Fullerene-Like Carbon Films

Superlow Friction of Titanium/silicon Codoped Hydrogenated Amorphous Carbon Film in the Ambient Air

Ultra-low Friction of A-C:H Films Enabled by Lubrication of Nanodiamond and Graphene in Ambient Air

A Near-Frictionless and Extremely Elastic Hydrogenated Amorphous Carbon Film with Self-Assembled Dual Nanostructure.

Ultra-elastic recovery and low friction of amorphous carbon films produced by a dispersion of multilayer graphene

Heating Induced Nanostructure and Superlubricity Evolution of Fullerene-Like Hydrogenated Carbon Films

Influence of Tribofilm on Superlubricity of Highly-Hydrogenated Amorphous Carbon Films in Inert Gaseous Environments

Medium ion energy synthesis of hard elastic fullerene-like hydrogenated carbon film with ultra-low friction and wear in humid air

Influencing mechanisms of deposition bias voltage on superlubricious a-C:H films: Key role of nanoclustering structures in controlling structural evolution of transfer film

Mechanical Characterization of Ultra-Thin Fluorocarbon Films Deposited by R.F. Magnetron Sputtering

Structure Effects of Sp2-Rich Carbon Films under Super-Low Friction Contact

Unraveling the friction response from selective hydrogenation of textured amorphous carbon surface

Low friction under ultrahigh contact pressure enabled by self-assembled fluorinated azobenzene layers

Tribological performances of a-C films tested on dry nitrogen environment with various Hertz pressures: Failure mechanisms and in-situ formation graphene

Exploring the role of surface hydrogenation in anti-friction of circular-textured amorphous carbon film from the atomic level and its dependence on textured shape

Combined Effects of Structural Transformation and Hydrogen Passivation on the Frictional Behaviors of Hydrogenated Amorphous Carbon Films