Abstract:In this study, we mainly focus on the structural morphology and inter-atomic bonding state of tribofilms resulting from a highly-hydrogenated amorphous carbon (a-C:H) film in order to ascertain the underlying mechanisms for its superlubric behavior (i.e., less than 0.01 friction coefficient). Specifically, we achieved superlubricity (i.e., friction coefficients of down to 0.003) with this film in dry nitrogen and argon atmospheres especially when the tribo-pair is made of an a-C:H coated Si disk sliding against an a-C:H coated steel ball, while the a-C:H coated disk against uncoated ball does not provide superlubricity. We also found that the state of superlubricity is more stable in argon than in nitrogen and the formation of a smooth and uniformly-thick carbonaceous tribofilm appears to be one of the key factors for the realization of such superlubricity. Besides, the interfacial morphology of sliding test pairs and the atomic-scale bond structure of the carbon-based tribofilms also play an important role in the observed superlubric behavior of a-C:H films. Using Raman spectroscopy and high resolution transmission electron microscopy, we have compared the structural differences of the tribofilms produced on bare and a-C:H coated steel balls. For the a-C:H coated ball as mating material which provided superlow friction in argon, structural morphology of the tribofilm was similar or comparable to that of the original a-C:H coating; while for the bare steel ball, the sp2-bonded C fraction in the tribofilm increased and a fingerprint-like nanocrystalline structure was detected by high resolution transmission electron microscopy (HRTEM). We also calculated the shear stresses for different tribofilms, and established a relationship between the magnitude of the shear stresses and the extent of sp3-sp2 phase transformation.

Revealing the Low-Temperature Friction Behavior and Mechanisms of Hydrogenated Amorphous Carbon Films with Al/Cr/Si Doping

Achieving superlubricity and high adhesion strength of hydrogenated amorphous carbon film with Al/Cr/Si-doping

Superlow Friction of Titanium/silicon Codoped Hydrogenated Amorphous Carbon Film in the Ambient Air

Structural and tribological behaviours of silicon doped amorphous carbon films

Control of the Tribological Temperature Dependence of Hydrogenated Amorphous Carbon Films by Doping with W

Ultra-low Friction of A-C:H Films Enabled by Lubrication of Nanodiamond and Graphene in Ambient Air

Atomic-scale Insights into the Interfacial Instability of Superlubricity in Hydrogenated Amorphous Carbon Films

Fullerene-like Nanostructure Induced Excellent Friction Behavior in High Vacuum Environment for Hydrogenated Carbon Film

Tribological performances of a-C films tested on dry nitrogen environment with various Hertz pressures: Failure mechanisms and in-situ formation graphene

Atomic-scale Interfacial Instability of Hydrogenated Amorphous Carbon Film at Elevated Temperature

Influencing mechanisms of deposition bias voltage on superlubricious a-C:H films: Key role of nanoclustering structures in controlling structural evolution of transfer film

Tribology dependence on both structures of bulk a-C:H:Si films and transfer layer via adjustable Si content

Evolution of tribo-induced interfacial nanostructures governing superlubricity in a-C:H and a-C:H:Si films

Elevated temperature tribological properties of a-C:Si films sputtered from SiC target in the presence of C2H2 gas

Influence of Tribofilm on Superlubricity of Highly-Hydrogenated Amorphous Carbon Films in Inert Gaseous Environments

Superlow friction and wear enabled by nanodiamond and hexagonal boron nitride on a-C:H films surfaces in dry nitrogen

The Robust Superlubricity Behaviors of A-C:H Films on Different Roughness Interfaces at Surface Contact Scale

Friction behaviour and mechanism of a-C films in hydrogen, nitrogen, and oxygen atmospheres: Insights from reactive molecular dynamics

Modification of a-C:H films via nitrogen and silicon doping: The way to the superlubricity in moisture atmosphere

Structure and Characteristics of Amorphous (ti,si)–c:H Films Deposited by Reactive Magnetron Sputtering

Probing the low friction mechanisms of WC/a-C films under low humidity conditions