Abstract:A precursor CuO/ZnO/Al2O3 catalyst for methanol synthesis has been prepared at room temperature by introducing a ternary salt solution into the excess of sodium carbonate solution following the reverse co-precipitation method. The catalyst was tested for the synthesis of methanol from synthesis gas. The composition (vol. %) has been presented: CO, 22; CO2, 5.8; N2, 5.5; H2, balance. The methanol productivity was recorded to be 2.7 kg kgcat–1 h–1 at a temperature of 260 °С, a pressure of 3 MPa, and a space velocity of 61,700 l (kgcat)–1 h–1. The possibility of regenerating the activity of a catalyst subjected to conditions of artificial aging (overheating in a syngas environment) has been tested: approximately 92% of the initial activity could be restored. Physicochemical studies were conducted using the thermogravimetric analysis (TGA), Fourier-transform infrared spectroscopy (FTIR), the scanning electron microscopy (SEM), and the X-ray diffraction (XRD) techniques using the Cu, Zn, and Al oxides obtained following the co-precipitation method. X-ray studies revealed that an amorphous phase was obtained from the Al oxide that was synthesized following both the direct and reverse co-precipitation methods. The calcination temperature was 300 °C. Individual oxides of Cu and Zn obtained following the reverse co-precipitation method form crystalline phases when calcined at 300 °C. When all three ingredients are present, calcination of the sample at 300 °C helps obtain an X-ray amorphous structure of the catalyst characterized by a high specific surface area. High-temperature carbonates are formed from samples prepared using a ternary mixture of nitrate salts when these are calcined at 300 °C.

Properties of Cu/ZnO/Al2O3 Catalysts Modified by Titanium Additives in Synthesis of Methanol from Syngas Using Orthogonal Experimental Design

Methanol Synthesis from CO 2 and H 2 over Pd/ZnO/Al 2 O 3 : Catalyst Structure Dependence of Methanol Selectivity

Cu/Zno/Al2o3 Catalysts Modified by Octa-Potassium Titanate Whiskers with Ultrasonic Treatment for Methanol Synthesis

Effect Of Titanium On Methanol Synthesis From Co2 Hydrogenation Over Cu/Gamma-Al2o3

Effect of Titanium on Methanol Synthesis from CO2 Hydrogenation over Cu/γ-Al2O3

The studies of methanol synthesis over the titanium-modified γ-alumina-supported CuO catalysts from CO2 hydrogenation

Low-temperature methanol synthesis catalyzed over Cu/γ-Al2O3–TiO2 for CO2 hydrogenation

RKCL3827 METHANOL SYNTHESIS BY CO2 HYDROGENATION OVER TITANIUM MODIFIED Γ-Al2o3 SUPPORTED COPPER CATALYSTS

Low-Temperature Methanol Synthesis Catalyzed Over Cu/Gamma-Al2o3-Tio2 For Co2 Hydrogenation

Boosting Toluene Combustion in Pt-Co3O4 Catalysts by Directional Tuning Strong Metal-Support Interactions Through Metal-Organic Template Pyrolysis

Influence of Acid-Base Properties of ZnMgAl-mixed Oxides for the Synthesis of 1-Methoxy-2-propanol

Self-assembly of a Highly Stable and Active Co3O4/H-TiO2 Bulk Heterojunction with High-Energy Interfacial Structures for Low Temperature CO Catalytic Oxidation

Dynamic Transformation of Active Components in Cu-ZnO-Al_2O_3 Catalyst for Methanol Synthesis at High Temperature

Effective Cu/ZnO/Al2O3 Catalyst for Methanol Production: Synthesis, Activation, Catalytic Performance, and Regeneration

Influence of the Calcination on the Activity and Stability of the Cu/ZnO/Al2O3 Catalyst in Liquid Phase Methanol Synthesis

Cu/ZnO/Al2O3 Catalyst Modulated by Zirconia with Enhanced Performance in CO2 Hydrogenation to Methanol

Methanol Synthesis from CO2 Hydrogenation over a Novel Titanium-Modified Γ-Al2o3 Supported Copper Catalyst

Modulation of Al2O3 and ZrO2 composite in Cu/ZnO-based catalysts with enhanced performance for CO2 hydrogenation to methanol

Preparation of CuO/ZnO/Al2O3 Catalysts for Methanol Synthesis Using Parallel-Slurry-mixing Method

Cuo/Zno/Al2o3 Catalyst Prepared by Mechanical-Force-Driven Solid-State Ion Exchange and Its Excellent Catalytic Activity under Internal Cooling Condition

Improved charge transfer and morphology on Ti-modified Cu/γ-Al 2 O 3 /Al catalyst enhance the activity for methanol steam reforming