Abstract:Alumina films were deposited from a new plasma method using aluminum acetylacetonate (AAA) powder as precursor. The AAA was sputtered in argon and oxygen plasma mixtures. It was investigated the effect of the oxygen proportion (O2%) on the properties of the coatings. Deposition rate was derived from the layer height measured by profilometry. The elemental composition and molecular structure of the films were determined by Rutherford backscattering and infrared spectroscopies, respectively. Grazing incidence X-ray diffraction was used to investigate the microstructure of the films while hardness was determined by nanoindentation technique. Inspections on the surface morphology and on the film composition were conducted associating scanning electron microscopy and energy dispersive spectroscopy. Incorporation of oxygen affects the plasma kinetics and consequently the properties of the coatings. As moderated concentrations of oxygen (< 25%) are added, the structure is predominantly organic containing stoichiometric amorphous alumina. On the other hand, as high O2% (> 25%) are incorporated, the structure become rich in metallic aluminum with carbon rising at low proportions. The deposited layer is not homogeneous in thickness once the chemical composition of the precursor is changed by the action of the reactive oxygen plasma. Oxygen ablation on the film surface also contributes to the lack of homogeneity of the structure, especially as high oxygen proportions are imposed. Hardness data (0.5-2.0 GPa) corroborated the idea of an amorphous structure. Based on the results presented here it was possible to identify the oxygen concentration in the plasma atmosphere which mostly removed organics while preserving the stoichiometric alumina precipitation, subject of great relevance as one considers the reduction in the energy necessary for the creation of fully oxide coatings.

Crystallization of Alumina Films Deposited by Reactive Magnetron Sputtering with Resputtering Technique at Low Temperature

Low-Temperature Crystallization and Hardness Enhancement of Alumina Films Using the Resputtering Technique

A study of sputtering process for nanocrystalline FeAlN soft magnetic thin films

Molecular Dynamics Study of Substrate Temperature and Incident Energy Influence on the Crystallization Behavior of Alumina Thin Film Deposition Process

The Microstructure, Morphology, and Mechanical Properties of Sol-Gel-derived Amorphous Aluminum Oxide Films

Impact of Alumina Coatings on Aluminum-Induced Crystallization of Polycrystalline Silicon Films

Preparation and Characterization of Α-Al2o3 Film by Low Temperature Thermal Oxidation of Al8Cr5 Coating

Facile synthesis of nano-crystalline alpha-alumina at low temperature via an absolute ethanol sol-gel strategy

Novel Sandwich Structure for Aluminum Induced Crystallization of Amorphous Silicon Thin Films at Low Temperature

Microstructure, infrared optical properties and thermal stability of ZrB2 and double-layer-structure Al2O3/ZrB2 thin films by magnetron sputtering technique

Preparation of Self-Healing Α-Al2o3 Films by Low Temperature Thermal Oxidation

Preparation of Aln Thin Films for Film Bulk Acoustic Resonator Application by Radio Frequency Sputtering

Innovative low temperature plasma approach for deposition of alumina films

Microstructure, Morphology and Their Annealing Behaviors of Alumina Films Synthesized by Ion Beam Assisted Deposition

A novel low temperature synthesis technique of sol–gel derived nanocrystalline alumina abrasive

The Effect of Chromium on the Gamma to Alpha Phase Transition of Alumina Coating Formed on 316L SS by a Cathodic Micro Arc Deposition (CMAD) Process

Improving the structural performance of low-temperature sputtered AlN on silicon substrate

Preparation of Alumina Thin Films by Reactive Modulated Pulsed Power Magnetron Sputtering with Millisecond Pulses

Enhanced Formation of Α-Al2o3 at Low Temperature on Cr/Al Coating by Controlling Oxygen Partial Pressure

Magnetron sputtering technique for analyzing the influence of RF sputtering power on microstructural surface morphology of aluminum thin films deposited on SiO2/Si substrates

Flash Sintering of High-Purity Alumina at Room Temperature