Abstract:Sugar beet pulp polyol‐based rigid polyurethane foam composites as environmentally‐friendly insulation material. The building and construction industry is under increasing pressure to make insulation materials greener, more sustainable, and less flammable. In this study, sugar beet pulp was liquified under the optimized liquefaction conditions and used as the source of bio‐polyol (SBpol) in the production of bio‐based rigid polyurethane foam (sPUF). In order to improve the flame retardancy, sPUF composites were prepared with the addition of flame retardants; expandable graphite (EG) and/or dimethyl methyl phosphonate (DMMP). The bio‐polyol was used at a fixed ratio of 50 php in sPUF composites whereas the total ratio of flame retardants was fixed at 20 php. The effects of the ratio of EG and/or DMMP on the morphological, physicomechanical, thermal, and flame retardant properties of sPUF composites were evaluated. Although the thermal conductivity values of flame retardant added sPUF composites were increased in comparison to the petroleum‐based foam, the compressive strength values were decreased as the amount of DMMP increased in the flame retardant formulation. Thermogravimetric analysis showed that the onset of decomposition of 20 php DMMP‐containing sPUF composite decreased to 168.3°C. Although the limiting oxygen index (LOI) value of the petroleum‐based PUF was as low as 19.7%, the LOI value of the sPUF/10E/10D foam increased to 24.9% (by about 26%). According to the cone calorimeter results, the peak heat release rate (pHRR) of sPUF was much higher than the petroleum‐based foam. The incorporation of both DMMP and EG could further improve the flame retardant properties. The pHRR value of sPUF/10E/10D was 28.1% lower than that of sPUF. The results have shown that flame retardancy of sPUF composites could be improved by the addition of EG which acts in the condensed phase and DMMP, which acts mainly in the gas phase during burning. Flame retardant incorporated sPUF composites are considered as promising materials for use in insulation applications.

Rigid bio-foam plastics with intrinsic flame retardancy derived from soybean oil

Preparation and properties of bio‐based flame‐retardant rigid polyurethane foams with soybean oil polyols containing phosphorus

Effect of flame retardants on mechanical and thermal properties of bio-based polyurethane rigid foams

MECHANICAL PERFORMANCE AND BIODEGRADABILITY OF THE FOAMS DERIVED FROM SOYBEAN OIL RESIN

Bio-Based Rigid Polyurethane Foams Modified with Phosphorus Flame Retardants

Preparation of bio‐based soybean oil polyol modified 3630 polyol‐based rigid polyurethane foam and its improved thermal stability, flame retardant, and smoke suppression performances

Bio-based plastic foams from functionalized plant oil and natural fiber

Fabrication of nickel phytate modified bio-based polyol rigid polyurethane foam with enhanced compression-resistant and improved flame-retardant

Bio-based rigid polyurethane foam from castor oil with excellent flame retardancy and high insulation capacity via cooperation with carbon-based materials

Full Substitution of Petroleum-Based Polyols by Phosphorus-Containing Soy-Based Polyols for Fabricating Highly Flame-Retardant Polyisocyanurate Foams

Fabrication of flame retardant benzoxazine semi-biocomposites reinforced by ramie fabrics with bio-based flame retardant coating

Plant Oil‐based Biofoam Composites with Balanced Performance

The Synergistic Flame-Retardant Behaviors of Soybean Oil Phosphate-Based Polyols and Modified Ammonium Polyphosphate in Polyurethane Foam

Improved thermal stability and flame retardancy of soybean oil-based polyol rigid polyurethane foams modified with magnesium borate hydroxide and ammonium polyphosphate

Bio-Based Trivalent Phytate: A Novel Strategy for Enhancing Fire Performance of Rigid Polyurethane Foam Composites

Natural fiber reinforced plastic foams from plant oil-based resins

The Thermal and Combustion Properties of Soybean Oil Phosphate-Based Polyurethane Foam Composites Containing Polyol of Etidronic Acid

A Flame Retardant Containing Biomass-Based Polydopamine for High-Performance Rigid Polyurethane Foam

Bio‐based rigid polyurethane foam composites reinforced with flame retardants: From synthesis to performance evaluation

Phosphorus and nitrogen-containing soybean oil polyols: Effect on the mechanical properties and flame retardancy of polyurethane foam

Durable flame-retardant, smoke-suppressant, and thermal-insulating biomass polyurethane foam enabled by a green bio-based system