Abstract:As a promising positive electrode material for high energy lithium-ion batteries, Li-rich manganese based cathode materials (LNCM) have a capacity over 250 mA h g(-1) but suffer from capacity fade and voltage decay during electrochemical cycling. Surface coating and bulk doping can improve the performance of LNCM from different aspects but both of them have shortcomings. Herein, we contrive to integrate the advantages of surface coating and bulk doping by YF3 modification. The phase transformation and gradient diffusion at the interface between the coating layer and bulk region were investigated by XRD, XPS, SEM, EDS and TEM. A LNCM material modified with 5 wt% YF3(0.05-YF3) shows an enhanced initial coulombic efficiency of 87.56% and an improved rate performance of 179.6 mA h g(-1) at 5C compared to 76.94% and 148.3 mA h g(-1) for the pristine, a discharge capacity of 217.9 mA h g(-1) and a retention of 85.2% after 150 cycles at 0.5C compared to 161.2 mAhg(-1),72.71% compared to the pristine. The improved performance can be attributed to the fact that part of Li2MnO3 had been activated during the YF3 modification and secondary calcination process, forming a spinel phase with three dimensional Li+ diffusion channels, which are beneficial to enhance rate performance. Besides, some F- ions diffused into the bulk region due to the gradient and bonded with TM, which are help to stabilize the structure. Further treatment at high temperature of the secondary calcination for the 0.05-YF3 modified materials show a lower voltage decay of 331.9 mV after 100 cycles at 0.5C compared to 608.6 mV for pristine, which further confirms the diffusion of F- and its effects on reducing the voltage decay and stabilizing the structure during cycling.

Enhanced Electrochemical Performance of Lif-Modified Lini1/3co1/3mn1/3o2 Cathode Materials for Li-Ion Batteries

Ordered LiNi0.5Mn1.5O4 Cathode in Bis(fluorosulfonyl)imide-Based Ionic Liquid Electrolyte: Importance of the Cathode-Electrolyte Interphase

Surface Modification and Electrochemical Properties of Li-Rich Layered Cathode Materials for Lithium-Ion Batteries

Enhanced Electrochemical Performance of Li1.2Mn0.54Ni0.13Co0.13O2 Cathode Material Coated with Li+-conductive Li2SiO3 for Lithium Ion Batteries

Improving the Electrochemical Performance of LiNi1/3Co1/3Mn1/3O2 Cathode Material by LiF Modification

LiNbO3 Coating and F- Doping Stabilize the Crystal Structure and Ameliorate the Interface of LiNi0.88Co0.06Mn0.03Al0.03O2 to Improve the Electrochemical Properties and Safety Capability

In–situ Construction of LixFeyOz Coatings on Cobalt–free Lithium–rich Cathode Materials for Enhanced Structural Stability and Electrochemical Performance

Structure and electrochemical performance of CaF 2 coated LiMn 1/3 Ni 1/3 Co 1/3 O 2 cathode material for Li-ion batteries

Enhancing Electrochemical Performance of LiNi0.6Co0.2Mn0.2O2 by Lithium-ion Conductor Surface Modification

Enhanced Electrochemical Performance of Li1.2mn0.54ni0.13co0.13o2 Cathode with an Ionic Conductive Livo3 Coating Layer

Improving the Electrochemical Performance of Li-rich Li1.2Ni0.2Mn0.6O2 by Using Ni-Mn Oxide Surface Modification

Thermodynamically Stable Dual‐Modified LiF&FeF3 layer Empowering Ni‐Rich Cathodes with Superior Cyclabilities

Improved Electrochemical Performance of LaF3-coated Layered Oxide Li1.2Mn0.54Ni0.13Co0.13O2 Cathode Material for Lithium- Ion Batteries Prepared by Sol-Gel Method

Fe Doped Li1.2Mn0.6-x/2Ni0.2-x/2FexO2 (x≤0.1) As Cathode Materials for Lithium-Ion Batteries

Understanding the Role of NH 4 F and Al 2 O 3 Surface Co-modi fi cation on Lithium-Excess Layered Oxide Li 1 . 2 Ni 0 . 2 Mn 0 . 6 O 2

Enhancing electrochemical performance of Mn doped LiFePO4 cathode materials for lithium-ion batteries

Re-understanding the Function Mechanism of Surface Coating: Modified Li-rich Layered Li1.2Mn0.54Ni0.13Co0.13O2 Cathodes with YF3 for High Performance Lithium-Ions Batteries

Can surface modification be more effective to enhance the electrochemical performance of lithium rich materials?

Synthesis and electrochemical performance of LiNi_(1/3)Mn_(1/3)Co_(1/3)O_2-zFz cathode materials for lithium ion batteries

Surface-Modification of Doping and Coating Li1.2Ni0.2Co0.08Mn0.52O2 as a Long Life Cathode Material of Lithium-Ion Battery by Sodium Salt Treatment

Effect of carbon coating on electrochemical performance of Li 1.048 Mn 0.381 Ni 0.286 Co 0.286 O 2 cathode material for lithium-ion batteries