Abstract:Carbon emissions have become a prominent global concern, with the utilization of fossil fuels serving as the primary contributor. Ammonia, being a hydrogen carrier without carbon, has the potential to be utilized through combustion, resulting in the production of water and nitrogen as ideal byproducts, which are environmentally benign. However, individual ammonia is difficult to combust due to its unfavorable combustion characteristics. Hence, ammonia needs to be blended with other fuels that possess superior combustion characteristics. Additionally, NH 3 inherently contains a significant amount of nitrogen, a fuel element that can contribute to the increased release of NO x emissions. In this work, a simulation was conducted using CHEMKIN to investigate the nitrogen transformation characteristics during ammonia/coal co-firing under deeply air-staged combustion. Experimental studies primarily focus on macroscopic factors, such as temperature and pressure, while often neglecting the analysis of reaction mechanisms. The utilization of the chemical reaction kinetics simulation method can provide valuable insights into the reactions and substances that exert the most significant impact on the formation of NO x , as well as elucidate the pathway of fuel-nitrogen conversion during combustion. Simulation results demonstrate that as the NH 3 co-firing ratio (CR-NH 3 ) increases, the volume content of NO x initially rises, reaching its peak at approximately 10% CR-NH 3 , and subsequently declines. The conversion rate of NO x increases as the combustion temperature in the primary combustion area rises. The primary reactions have a greater influence on the formation of NO at low-temperature conditions. However, it is important to note that low temperature also decreases the combustion efficiency. The incorporation of overfire air (OFA) in advance has the potential to mitigate nitrogen reduction in the primary combustion area, while simultaneously improving NO x emissions. With the oxygen concentration of primary air increased, the conversion rate of NO x gradually decreases. It undergoes a sharp change before reaching 21% oxygen concentration, after which it levels off. In addition, high oxygen concentration increases the pathway of NO consumption. When the excess air coefficient of OFA falls within the range of 0.35–0.45, the NO x conversion rate can be minimized. The present study aims to offer technical assistance and guidance for effectively controlling NO x emissions in ammonia/coal co-firing boilers.

Simulation and control on ammonia carbonation under low temperature and pressure

Modelling and simulation of carbonation process of ammoniacal brine: I kinetic model of carbonation reactions

MODELLING AND SIMULATION OF CARBONATION PROCESS OF AMMONIACAL BRINE Ⅱ THE REACTOR/CRYSTALLIZER MODEL OF CARBONATION COLUMNS

Application of advanced process control to carbonation columns in manufacture of soda

Study on the kinetics of Ca-based CO2 sorbent of carbonation and calcination for adsorption enhanced reforming process

Particle Carbonation Kinetics Models and Activation Methods under Mild Environment: the Case of Calcium Silicate

Experimental Study on Carbon Dioxide Absorption by Aqueous Ammonia with Nickel and Chromium Ions in Bubbling Tower at Low Temperatures

Optimization of Calcium Carbide Residue Utilization for Producing High‐quality Calcium Carbonate

Carbonation Process Simulation for Cement-Based Materials Based on Microstructure by a Cement Hydration Model

Kinetics Study on CaO Carbonation Reaction at Pressurized Conditions

Lattice Boltzmann Simulation on Carbonation of CaO with CO2

Study on Ammonium Bicarbonate Decomposition after CO2 Sequestration by Ammonia Method

Simulation Optimization of A New Ammonia-Based Carbon Capture Process Coupled with Low-Temperature Waste Heat Utilization

Effect of carbonized ammonia constituent on the crystallization process

Simultaneous CO2 absorption, mineralisation and carbonate crystallisation promoted by amines in a single process

Thermodynamic Model and Process Simulation for CO2 Removal with Low Temperature Methanol

Optimization of Carbon Capture Process Using Aqueous Ammonia with Rate-Based Simulation Method

Experimental Studies And Rate-Based Process Simulations Of Co2 Absorption With Aqueous Ammonia Solutions

Numerical Simulation of CO2 Extraction from the Cement Pre-Calciner Kiln System

Simulation of Sodium Bicarbonate Purification via the Sodium Sulfate Carbonation Route

Simulation study on nitrogen transformation characteristics of NH 3 /Coal Co-firing under deeply air-staged condition