Abstract:The technical development of supercritical CO 2 , energy systems, CO 2 capture, and other applications has become a hot topic in recent years. Therefore, molecular dynamics simulation (MD) of CO 2 , especially the investigation at the CO 2 supercritical region is urgently needed. This study focused on the optimization of common CO 2 potential model EPM2 (elementary physical model—2) combined MD forcefield OPLS-AA (optimized potentials for liquid simulations—all atom) and CHARMM (chemistry at Harvard macromolecular mechanics for MD simulation). Through adjusting angle parameters according to EPM2, vapor-liquid equilibrium curve, critical point and supercritical region could be well corresponding with experiments, which can be more accurate than previous approaches. The simulated results using 179.63° in OPLS-AA forcefield can not only correspond to supercritical phase of near-critical region (within ±10% error range under CO 2 is at 468 kg/m 3 , 304.2–320 K, 7.2–10.0 MPa), but also be consistent with actual CO 2 properties in gas phase of near-critical region (temperature range can reach 304.2–350 K while the density scope can reach 15–168 kg/m 3 ). Besides, optimized potential model also has a certain reliability on the investigation of CO 2 diffusion properties. The values simulated have the same order of magnitude as literature values, especially simulated diffusion coefficient values at gas phase. The CO 2 property of heat capacity is also simulated, and the errors are within ±15%. That is to say, the optimized CO 2 potential parameter also has a certain accuracy to analyze CO 2 heat transfer. The angle value optimized in this study may be useful for the fundamental understanding of the supercritical state and it can well be applied in the further investigation of CO 2 systems.

Thermodynamic Model and Process Simulation for CO2 Removal with Low Temperature Methanol

Simulation of Fluidized Bed Reactor for Methanol to Olefins(MTO)Process

The Coupling Performance During Reactive Sorption Enhanced Reforming (reser) Process: Simulation and Experimental Studies

Simulation, sensitivity analysis and optimization of a continuous catalytic reforming process

Liquid-phase CO2 Hydrogenation to Methanol Synthesis: Solvent Screening, Process Design and Techno-Economic Evaluation

Process optimization of CO2membrane and cryogenic hybrid separation

Simulation and Analysis of the Regeneration Process of Methanol to Propylene

Thermodynamic modeling and process simulation for CO; absorption into aqueous monoethanolamine solution

A Study on Process Simulation for the Carbon Dioxide Removal with MDEA

Absorption Solubility Calculation and Process Simulation for CO2 Capture

Process Simulation for Separation of Dimethyl Carbonate and Methanol Through Atmospheric-Pressurized Rectification

Kinetics region and model for mass transfer in carbon dioxide absorption into aqueous solution of 2-amino-2-methyl-1-propanol

Absorption solubility calculation and process simulation for CO; capture

Numerical Simulation of CO Methanation for the Production of Synthetic Natural Gas in a Fluidized Bed Reactor

Liquid-phase CO 2 hydrogenation to methanol synthesis: Solvent screening, process design and techno-economic evaluation

Dynamic modelling and simulation of a post-combustion CO2 capture process for coal-fired power plants

Molecular Dynamics Study of CO2 Phase Change Transport in the Near-Critical Region: Model Parameter Optimization

Methanol production from natural gas reforming and CO2 capturing process, simulation, design, and technical-economic analysis

Modelling of CO2 solubility in phase separation solvent composed of amine/ether/water system for CO2 capture

Process simulation for CO; absorption with mixed amine solution

Optimization of solvent properties for post-combustion CO2 capture using process simulation