Abstract:The solvent-based carbon capture process is the most matured and economical route for decarbonizing the power sector. In this process, aqueous monoethanolamine (MEA) is commonly used as the solvent for CO2 scrubbing from power plant and industrial flue gases. Generally, aqueous MEA with 30 wt% (or less) concentration is considered the benchmark solvent. The CO2 solubility data in aqueous MEA solution, used for modelling of the vapour-liquid equilibria (VLE) of CO2 in MEA solutions, are widely published for 30 wt% (or less) concentration. Aqueous MEA with higher concentrations (from 40 to 100 wt%) is considered in solvent-based carbon capture designs with techniques involving process intensification (PI). PI techniques could improve the process economics and operability of solvent-based carbon capture. Developing PI for application in capture process requires CO2 solubility data for concentrated MEA solutions. These data are however limited in literature. The modelling of the vapour-liquid equilibria (VLE) of CO2 in MEA solutions for PI-based solvent capture techniques involving stronger MEA solution of about 80 wt% concentration requires solubility data at the concentration. In this study, the data for 80 wt% MEA is presented for 40,60, 100 and 120 degrees C. The experimental technique and analytical procedure in this study were validated by comparing the measurements for 30 wt% MEA with data from the literature. The data from this study can be fitted to VLE models such as electrolyte NRTL, extended UNIQUAC etc. which is an important component of solvent-based capture model using MEA as the solvent. More accurate VLE models will improve the prediction accuracy of capture level, rich loading etc. using PI-based solvent-based capture model.

Thermodynamic modeling and process simulation for CO; absorption into aqueous monoethanolamine solution

Absorption solubility calculation and process simulation for CO; capture

Experimental And Rate-Based Modeling Study Of Co2 Capture By Aqueous Monoethanolamine

Absorption Solubility Calculation and Process Simulation for CO2 Capture

Simulation and Optimization Study on Aqueous MEA-Based CO2 Capture Process

A Study on Process Simulation for the Carbon Dioxide Removal with MDEA

Experimental and Modeling Study of Trace CO2 Removal in a Hollow-Fiber Membrane Contactor, Using CO2-Loaded Monoethanolamine

3D multiphase flow simulation of Marangoni convection on reactive absorption of CO<sub>2</sub> by monoethanolamine in microchannel

A Rigorous Model for Absorption of Carbon Dioxide into Aqueous N-Methyldiethanolamine Solution

Experimental Study of the Absorption and Regeneration Performance of Several Candidate Solvents for Post-Combustion CO2 Capture

Comprehensive Analysis of Thermodynamic Models for CO2 Absorption into a Blended N,N-diethylethanolamine-1,6-hexamethyl Diamine (DEEA-HMDA) Amine

CFD simulation of carbon dioxide in flue gas with monoethanolamine in structured packing

Mass transfer dynamics of single CO 2 bubbles rising in monoethanolamine solutions: Experimental study and mathematical model

Performance evaluation and optimization of hollow fiber membrane contactors for carbon dioxide absorption: A comparative study of ammonia, ethanolamine, and diethanolamine solvents

Process Simulations of CO2 Desorption in the Interaction between the Novel Direct Steam Stripping Process and Solvents

Thermodynamic Model and Process Simulation for CO2 Removal with Low Temperature Methanol

Mixture absorption system of monoethanolamine-triethylene glycol for CO 2 capture

Simulation and pilot plant measurement for CO2 absorption with mixed amines

CO2 Absorption with Aqueous Tertiary Amine Solutions: Equilibrium Solubility and Thermodynamic Modeling

Sensitivity Analysis of Post Combustion Carbon Capture Using Monoethanolamine (MEA) as a Solvent. A Simulation Study

Experimental Study Of Co2 Solubility In High Concentration Mea Solution For Intensified Solvent-Based Carbon Capture