Abstract:Experimental and numerical studies were conducted to reveal the flow and heat transfer characteristics of liquid laminar flow in microtubes. Both the smooth fused silica and rough stainless steel microtubes were used with the hydraulic diameters of 50–100μm and 373–1570μm, respectively. For the stainless steel tubes, the corresponding surface relative roughness was 2.4%, 1.4%, 0.95%. The experiment was conducted with deionized water at the Reynolds number from 20 to 2400. The experimental data revealed that the friction factor was well predicted with conventional theory for the smooth fused silica tubes. For the rough stainless steel tubes, the friction factor was higher than the prediction of the conventional theory, and increased as the surface relative roughness increased. The results also confirmed that the conventional friction prediction was valid for water flow through microtube with a relative surface roughness less than about 1.5%. The experimental results of local Nusselt number distribution along the axial direction of the stainless steel tubes do not accord with the conventional results when Reynolds number is low and the relative thickness of the tube wall is high. The numerical study reveals that the large ratio of wall thickness over tube diameter in low Reynolds number region causes significant axial heat conduction in the tube wall, leading to a non-linear distribution of the fluid temperature along the axial direction. The axial heat conduction effect is gradually weakened with the increase of Reynolds number and the decrease of the relative tube wall thickness and thus the local Nusselt number approaches the conventional theory prediction.

Flow resistance and heat transfer characteristics in micro-cylinders-group

Numerical Investigation Of Laminar Flow And Heat Transfer In Micro-Cylinder-Groups

Experimental investigation on heat transfer of micro-cylinders-group at low reynolds number

Experimental investigation on resistance characteristics in micro/mini cylinder group

Influence of Dimension Effect on Convective Beat Transfer in Micro/mini-Cylinders-group at Low Reynolds Number

Flow Characteristics in Micro/mini Cylinder Group

Forced convective heat transfer characteristics in micro/minicylinders group at low Reynolds number

Numerical investigation on heat transfer of liquid flow at low Reynolds number in micro-cylinder-groups

The Flow Resistance and Heat Transfer Characteristics of Micro Pin-Fins with Different Cross-Sectional Shapes

Laminar flow characteristics in in-line arranged micro-cylinder groups

Influence of tip clearance on heat transfer efficiency in staggered micro-cylinders-group

Influence of heat flux on forced convective heat transfer in duct with micro-cylinder-group

Influence of tip clearance on heat transfer efficiency in micro-cylinders-group heat sink

A Fundamental-Study of the Heat-Transfer and Flow Situation Around Spacers (A Single Row of Several Cylindrical Rods in Cross Flow)

Vortex Distribution and Mixed Convection of Liquid Flow Across Micro-Cylinders in a Rectangular Channel

Experimental and Numerical Studies of Liquid Flow and Heat Transfer in Microtubes

Experimental study on influence of microscale effects on liquid flow characteristic in microtubes

Single-phase flow and heat transfer in micro-channels

An Experimental Investigation of Single-Phase Heat Transfer in 0.045mm to 0.141mm Microtubes

An Experimental Study of Flow and Heat Transfer in a 19.6μm Inner Diameter Quartz Microtube

Experimental and Numerical Analysis on Heat Transfer Performance of Slug Flow in Rectangular Microchannel