Abstract:Tip clearance represents a simple design intervention strategy to mitigate the high hydraulic penalties often associated with microchannel heat sinks. This approach has not been widely explored for enhanced microchannel heat sinks, having previously focused only on conventional (uniform) tip clearance design for straight microchannels. In view of this, the present work investigates the performance of an enhanced heat sink, specifically oblique-cut fin microchannels, with tip clearance designs. Two different designs are considered, namely conventional/uniform tip clearance ( utc ) and a newly conceptualized modulated tip clearance ( mtc ). Numerical simulations are conducted using ANSYS FLUENT 2022 R1 first for straight microchannels, which are considered the baseline to which oblique-cut fin microchannel designs are compared. The simulations are carried out under laminar flow regime including conjugate heat transfer in a heated solid substrate for flow rates of 250 – 650 mL/min. The results indicate that utc significantly reduces pressure drop though can increase thermal resistance for the oblique channels. The underlying physical mechanisms responsible for this observation are elucidated by examining thermal and flow behaviours in and around oblique cut slots. Based on the flow behaviour in oblique slots with utc , modulated tip clearance ( mtc ) concept is introduced and investigated. When compared to utc cases, mtc tends to reduce the thermal resistance substantially, though depending upon oblique cut angle and flow rate. However, the Performance Index ( PI ) shows that utc improves the overall performance in the range of 10–15 % compared to that observed with mtc cases, though the factor of improvement reduces closely to 5 % at 650 mL/min. In addition, the overall performance in terms of heat transfer and hydraulic pumping power further show that utc and mtc design strategies are competitive, and warrant further multi-objective optimization investigations to determine the best design option overall.

Influence of tip clearance on heat transfer efficiency in staggered micro-cylinders-group

Effect of Tip Clearance on the Heat Transfer and Pressure Drop Performance in the Micro-Reactor with Micro-Pin–fin Arrays at Low Reynolds Number

Influence of Compression-Expansion Effect on Oscillating-Flow Heat Transfer in A Finned Heat Exchanger

Study on the efficient heat transfer mechanism of microchannel pin-fin arrays under low pumping power

Thermohydraulic performance of the microchannel heat sinks with three types of double-layered staggered grooves

Experimental Study of Single-Phase Pressure Drop and Heat Transfer in a Micro-Fin Tube

Investigation of fluid flow and heat transfer characteristics in a microchannel heat sink with double-layered staggered cavities

The influence of tip clearance and shape of pin fins on the heat transfer performance and friction factor in aluminum silicon alloy heat exchanger

Numerical simulation on heat transfer enhancement of free piston Stirling engine heater with composite cross section mini channels

Effect of fin shapes on flow boiling heat transfer with staggered fin arrays in a heat sink

Experimental and Numerical Analysis on Heat Transfer Performance of Slug Flow in Rectangular Microchannel

Numerical investigations of heat transfer augmentation in a microchannel heat sink with different shaped periodic reentrant cavities on channel sidewalls

Numerical investigation on the impact of injection rates on cooling performance in a rotor-stator cavity with liquid nitrogen spraying

Numerical study of the effects of geometric parameters and nanofluid properties on heat transfer and pressure drop in helical tubes

Numerical investigation of tip clearance designs for oblique-cut fin microchannels

Experimental and Computational Assessment into the Heat Transfer for the Blade Multicavity Tips

Numerical Study of Enhanced Heat Transfer of MicroChannel Heat Sink with Nanofluids

Numerical Study on Heat Transfer Efficiency and Inter-Layer Stress of Microchannel Heat Sinks with Different Geometries

On the assessment of the thermal performance of microchannel heat sink with nanofluid

Numerical study flow and heat transfer characteristics of superhydrophobic single tube bundle surface and wake flow

Numerical study on vibration heat transfer enhancement of multi-configured blunt-headed cylinder with fin device