Abstract:The inhibitive effect of cetyltrimethylammonium bromide (CTAB) on copper corrosion in aerated H2SO4 solutions was investigated by means of electrochemical impedance spectroscopy (EIS) and potentiodynamic polarization techniques. CTAB inhibited copper corrosion more strongly than tetramethylammonium bromide (TMAB) under the same conditions due to the chemisorption of the n-cetyl group on the copper surface. The surface of the copper electrode was positively charged in sulfuric acid solution at the corrosion potential. The copper corrosion inhibition of CTAB and TMAB was attributed to the synergistic effect between bromide anions and positive quaternary ammonium ions. The C16H33N(CH3)(3)(+) and N(CH3)(4)(+) ions may electrostatically adsorb on the copper surface, which is primarily covered with adsorbed bromide ions. The inhibition efficiency of CTAB depended on the CTAB concentration and the immersion time for the copper electrode in corrosive solutions. Based upon the variation of impedance display of copper with the CTAB concentration and the immersion time, an adsorption model of CTAB on the copper surface was proposed. The C16H33N(CH3)(3)(+) ions adsorbed on the copper surface by horizontal binding to hydrophobic hydrocarbon chains at the low CTAB concentrations, whereas a perpendicular adsorption dominated as a result of an interhydrophobic chain interaction when the CTAB concentration increased. (C) 2001 The Electrochemical Society.

Corrosion Inhibition of Copper in Hydrochloric Acid by Coverage with Trithiocyanuric Acid Self-Assembled Monolayers

Corrosion Protection of Copper by Self-Assembled Monolayers Modified in Aqueous Micellar Solution

Inhibition Effect of 2,4,6-Trimercapto-1,3,5-triazine Self-Assembled Monolayers on Copper Corrosion in NaCl Solution

A Sulphuric Solution Inhibitor Containing Dithiocarbamate and Its Anti-corrosion Effect on Copper

Inhibition of copper corrosion by self-assembled monolayers of triazole derivative in chloride-containing solution

Corrosion Inhibition of Copper by 2,5-Dimercapto-1,3,4-thiadiazole Monolayer in Acidic Solution

Investigation of the inhibition effect of trithiocyanuric acid on corrosion of copper in 3.0 wt.% NaCl

Inhibition of Copper Corrosion in Sodium Chloride Solution by the Self-Assembled Monolayer of Sodium Diethyldithiocarbamate

Inhibition of Copper Corrosion by Modifying Cysteine Self‐assembled Film with Alkylamine/alkylacid Compounds

A Study of Corrosion Behavior of Copper in Acidic Solutions Containing Cetyltrimethylammonium Bromide

Protection of Copper Corrosion by Modification of Dodecanethiol Self-Assembled Monolayers Prepared in Aqueous Micellar Solution

Studies on corrosion inhibition of copper by alkanethiol SAMs prepared in aqueous micellar solution

Inhibition of Copper Corrosion by the Formation of Schiff Base Self-Assembled Monolayers

Inhibition Action of the Self-Assembled Monolayers of P-hydroxybenzoic Acid on Copper

Protection of Copper Corrosion in 0.5 M Nacl Solution by Modification of 5-Mercapto-3-phenyl-1,3,4-thiadiazole-2-thione Potassium Self-Assembled Monolayer

Corrosion Protection of Copper by a Self-Assembled Monolayer of Alkanethiol

Electrochemical and Anti-Corrosion Properties of Octadecanethiol and Benzotriazole Binary Self-Assembled Monolayers on Copper

Protection of self-assembled monolayers formed from triethyl phosphate and mixed self-assembled monolayers from triethyl phosphate and cetyltrimethyl ammonium bromide for copper against corrosion

5,5′-Dithiobis-(2-nitrobenzoic Acid) Self-Assembled Monolayer for Corrosion Inhibition of Copper in Sodium Chloride Solution

A New Method for Preventing Corrosion Failure: Thiourea and Hexamethylenetetramine As Inhibitor for Copper

Self-assembled monolayer of ammonium pyrrolidine dithiocarbamate on copper detected using electrochemical methods, surface enhanced Raman scattering and quantum chemistry calculations