Abstract:As the most basic interconnection metallic material, copper (Cu) has been widely used in giant-large scale integrated circuits (GLSI). Corrosion inhibitors always play a crucial role in the Cu chemical mechanical polishing (CMP) process. The passivation of hydrogen peroxide (H2O2) alone is too weak to adequately protect against chemical corrosion on the surface of Cu film, thus, it is necessary to add corrosion inhibitors to the slurry. As a representative corrosion inhibitor, 1, 2, 4-triazole was compared with a novel corrosion inhibitor known as TT-LYK (ethanol, 2, 2′-[[(methyl-1H-benzotriazol-1-yl) methyl] imino] bis-), and their mixed inhibitor was studied in this paper. Different analytical methods such as the potentiodynamic polarization test, physical appearance phenomenon analysis, contact angle measurement and dynamic polishing experiment were used to compare their inhibition properties, and the fitting of different adsorption isotherms and static erosion tests were used to clarify the adsorption types and passivation processes respectively. The results indicated that both TT-LYK and 1, 2, 4-triazole achieved the goal of inhibiting Cu surface corrosion, but the inhibition effect of TT-LYK was slightly weaker at the same mass fraction. The corrosion protection of the two inhibitors is mainly attributable to the presence of organic inhibitor molecules on the surface of Cu by chemisorption and physisorption simultaneously. The passivation processes of both can be divided into two steps. First, the direct growth of the Cu-inhibitor passivation film occurs, followed by the redeposition of the Cu-inhibitor complex. From the results of electrochemical experiments, it can be concluded that the structure of the thin passivation film growing on the Cu surface varies with the inhibitor, and the composition of the passivation film was investigated by XPS and Raman spectrum analysis. At the same time, the surface roughness after polishing was found to decrease with the increase in inhibition effect of the inhibitors. According to the inhibition characteristics of these two inhibitors, a mixed corrosion inhibitor (TT-LYK and 1, 2, 4-triazole) was proposed in this study. Under the synergistic inhibition action, better inhibition effect and surface quality for Cu CMP were obtained. This outcome may be ascribed to the variation in the structure and density of the passivation film.

Copper corrosion inhibition in acidic aqueous media through tolyltriazole application: performance analysis

3,5‐Bis(2‐thienyl)‐4‐amino‐1,2,4‐triazole As a Corrosion Inhibitor for Copper in Acidic Media

Corrosion inhibition threshold effect of 1,2,4-triazole in alkaline chemical mechanical polishing of copper: Investigations using synchrotron radiation microinfrared

1,2,4-Triazole as a corrosion inhibitor in copper chemical mechanical polishing

Adsorption behavior and corrosion inhibition performance of tetrazolium derivatives on electrolytic copper foil surface

Exploring the effectiveness of two triazole derivatives as copper corrosion inhibitors in NaCl solution: A combined approach of quantitative chemistry and dynamic molecular simulations

Synergistic inhibition of azoles compounds on chloride-induced atmospheric corrosion of copper: Experimental and theoretical characterization

Gravimetric and electrochemical statistical optimizations for improving copper corrosion resistance in hydrochloric acid using thiosemicarbazone-linked 3-acetylpyridine

Study on the film forming mechanism, corrosion inhibition effect and synergistic action of two different inhibitors on copper surface chemical mechanical polishing for GLSI

3,4-Dimethoxy phenyl thiosemicarbazone as an effective corrosion inhibitor of copper under acidic solution: comprehensive experimental, characterization and theoretical investigations

Insight into the anti-corrosion mechanism of 2-aminobenzenethiol as the inhibitor for copper in acid environment

A novel process for copper protection in the simulated industrial cooling water based on click synthesis and self‐assembling method

Investigation on the Mechanisms of Corrosion Inhibitor 5-aminotetrazole Used in the Copper Chemical Mechanical Polishing

Preparation of Bis-Thiophene Schiff Alkali-Copper Metal Complex for Metal Corrosion Inhibition

Insights into the Inhibition Mechanism of Three 5-Phenyltetrazole Derivatives for Copper Corrosion in Sulfuric Acid Medium Via Experimental and DFT Methods

Temporal Aspects of Corrosion Inhibition on Copper, Silver, and Copper-Silver Alloy: An Electrochemical Impedance Spectroscopy Study

Preparation of Triazole Compounds Via Click Chemistry Reaction and Formation of the Protective Self-Assembled Membrane Against Copper Corrosion

Experimental and theoretical study of 2-mercaptopyridine as an effective eco-friendly inhibitor for copper in aqueous NaCl

New epoxy resin as a corrosion inhibitor for the protection of carbon steel C38 in 1M HCl. experimental and theoretical studies (DFT, MC, and MD)

Assessment of the Inhibitory Efficacy of a Thiazole Derivative as an Efficient Corrosion Inhibitor for Augmenting the Resistance of MS in Acidic Environments

Anti-Corrosive Potentials of 1,2,4-Triazole-5-thiones For Mild Steel 1030 in Acidic Environment