Abstract:Polyvinylidenefluoride ( PVDF) hollow fiber membranes were fabricated by wet spinning (wet/wet) and dry-jet wet spinning (dry/wet; 3 cm air gap) processes with four types of polyvinylpyrrolidone (PVP) of different molecular weight as additives. Evolution of the precipitation kinetics, morphologies, permeation performances, and crystallization behaviors of the as-spun PVDF membranes were investigated. The PVDF membranes were well characterized by numerous state-of-the-art analytical techniques: scanning electron microscopy (SEM), X-ray diffraction (XRD), differential scanning calorimetry (DSC), thermogravimetric analysis (TGA) and attenuated total reflectance fourier Transform Infrared (FTIR-ATR) and elucidated accompanying with its precipitation kinetics obtained by light transmittance measurements. The precipitation kinetics results confirm that four PVDF/PVP/NMP dopes experience instantaneous demixing mechanism and the precipitation rate decreases as PVP molecular weight increases. Little peaks are found in the precipitation curves of the PVDF dopes containing PVP of low molecular weight. The SEM images indicate that the middle sponge-like layer sandwiched by double finger-like layers becomes thinner for the special precipitation behaviors. Visible large pores exist in the internal surfaces of the PVDF membranes spun by both wet/wet and dry/wet spinning processes. The increase in PVP molecular weight restricts the formation of large pores in the internal surfaces of the PVDF membranes for the increase in dope viscosity. The pure water permeability (PWP) of the as-spun PVDF membranes increases initially and then decreases as PVP molecular weight increases. The largest PWP flux of 316.7 Lm(-2) h(-1) bar(-1) is obtained for the PVDF membrane containing PVP K25 by wet/wet spinning process. The rejections for bovine serum albumin (BSA) by the as-spun PVDF membranes range from 35.4 to 82.9%. It illustrates that typical PVDF ultrafiltration membranes were obtained in this research. The melting temperature(T-m) of the PVDF hollow fiber membranes decreases with the increase in the PVP molecular weight as a whole. IR spectra and XRD patterns verify the exclusive formation of beta crystalline phase structure in the as-spun PVDF membranes. Copyright (C) 2010 John Wiley & Sons, Ltd.

Precipitation Kinetics, Morphologies, And Properties Of Poly(Vinyl Butyral) Hollow Fiber Ultrafiltration Membranes With Respect To Polyvinylpyrrolidone Molecular Weight

Preparation And Characterizations Of Charged Poly(Vinyl Butyral) Hollow Fiber Ultrafiltration Membranes With Perfluorosulfonic Acid As Additive

Evolution Of The Precipitation Kinetics, Morphologies, Permeation Performances, And Crystallization Behaviors Of Polyvinylidenefluoride (Pvdf) Hollow Fiber Membrane By Adding Different Molecular Weight Polyvinylpyrrolidone (Pvp)

Preparation of poly (vinyl butyral) hollow fiber ultrafiltration membrane via wet-spinning method using PVP as additive

Effect of Polymer Molecular Weight on the Morphology and Crystallization of Prepared PVDF Membranes

Influence of Dope Viscosity on the Fabrication of Pvdf Hollow Fiber Membranes with Single Skin Layer

Membranes of poly (vinyl butyral) (PVB) or cationic PVB (CPVB) blended with poly (vinylidene fluoride) (PVDF) prepared by a nonsolvent induced phase separation method: Miscibility and hydrophilicity

Preparation of PVB ultrafiltration membranes using PEG with different molecular weights as additives

Effects of Pore-Forming Additives on Structures and Properties of Pvdf/Fe3+/Cu2+ Hollow Fiber Membranes

Effect of Polyvinylpyrrolidone Molecular Weights on Morphology, Oil/Water Separation, Mechanical and Thermal Properties of Polyetherimide/Polyvinylpyrrolidone Hollow Fiber Membranes

EFFECTS OF POLYMER MOLECULAR WEIGHT ON PVDF MICROFILTRATION MEMBRANE PERFORMANCE BY IMMERSION PRECIPITATION PHASE INVERSION

Morphology and Performance of Polyvinylidene Fluoride/Perfluorosulphonic Acid Hollow Fibre Ultrafiltration Blend Membranes

Evolution of the precipitation kinetics, morphology, and permeation performance of phenolphthalein poly(ether sulfone) hollow-fiber membranes with polyvinylpyrrolidones of different molecular weights as additives

Preparation of Hydrophilic Polypropylene/Polyvinyl Butyral Hollow Fiber Membranes by Melt-spinning-stretching

Poly(vinyl chloride) (PVC) hollow fiber ultrafiltration membranes prepared from PVC/additives/solvent

Effect of polyvinylpyrrolidone on the morphology and properties of polyetherimide ultra-filtration membranes

Effect of Viscosity and Air Gap within the Spinneret on the Morphology and Mechanical Properties of Hollow-Fiber Polymer Membranes for Separation Performance

Improved Poly(vinyl Butyral) Hollow Fiber Membranes by Embedding Multi-Walled Carbon Nanotube for the Ultrafiltrations of Bovine Serum Albumin and Humic Acid

Effect of Pore-Forming Agents on Structure and Properties of Pvdf/Pvc Blend Membranes

Dual PVP Roles for Preparing PVDF Hollow Fiber Membranes with Bicontinuous Structures Via the Complex Thermally Induced Phase Separation (C-Tips)

Effect of Polymer Molecular Weight on Structure and Performance of PVDF Hollow Fiber Membranes Prepared Via TIPS Process with Co-Extrusion of Solvent Using Triple Orifice Spinneret