Abstract:Polyvinylidenefluoride ( PVDF) hollow fiber membranes were fabricated by wet spinning (wet/wet) and dry-jet wet spinning (dry/wet; 3 cm air gap) processes with four types of polyvinylpyrrolidone (PVP) of different molecular weight as additives. Evolution of the precipitation kinetics, morphologies, permeation performances, and crystallization behaviors of the as-spun PVDF membranes were investigated. The PVDF membranes were well characterized by numerous state-of-the-art analytical techniques: scanning electron microscopy (SEM), X-ray diffraction (XRD), differential scanning calorimetry (DSC), thermogravimetric analysis (TGA) and attenuated total reflectance fourier Transform Infrared (FTIR-ATR) and elucidated accompanying with its precipitation kinetics obtained by light transmittance measurements. The precipitation kinetics results confirm that four PVDF/PVP/NMP dopes experience instantaneous demixing mechanism and the precipitation rate decreases as PVP molecular weight increases. Little peaks are found in the precipitation curves of the PVDF dopes containing PVP of low molecular weight. The SEM images indicate that the middle sponge-like layer sandwiched by double finger-like layers becomes thinner for the special precipitation behaviors. Visible large pores exist in the internal surfaces of the PVDF membranes spun by both wet/wet and dry/wet spinning processes. The increase in PVP molecular weight restricts the formation of large pores in the internal surfaces of the PVDF membranes for the increase in dope viscosity. The pure water permeability (PWP) of the as-spun PVDF membranes increases initially and then decreases as PVP molecular weight increases. The largest PWP flux of 316.7 Lm(-2) h(-1) bar(-1) is obtained for the PVDF membrane containing PVP K25 by wet/wet spinning process. The rejections for bovine serum albumin (BSA) by the as-spun PVDF membranes range from 35.4 to 82.9%. It illustrates that typical PVDF ultrafiltration membranes were obtained in this research. The melting temperature(T-m) of the PVDF hollow fiber membranes decreases with the increase in the PVP molecular weight as a whole. IR spectra and XRD patterns verify the exclusive formation of beta crystalline phase structure in the as-spun PVDF membranes. Copyright (C) 2010 John Wiley & Sons, Ltd.

Effects of Pore-Forming Additives on Structures and Properties of Pvdf/Fe3+/Cu2+ Hollow Fiber Membranes

Influence of additives on phase separation process of PVDF solution and membrane morphology

Modification of Porous Poly(Vinylidene Fluoride) Membrane Using Amphiphilic Polymers with Different Structures in Phase Inversion Process

Porous Membranes Modified by Hyperbranched Polymersi. Preparation and Characterization of PVDF Membrane Using Hyperbranched Polyglycerol As Additive

Structure formation and characterization of PVDF hollow fiber membranes by melt-spinning and stretching method

Fabrication of Hydrophilic and Sponge-Like PVDF/brush-like Copolymer Blend Membranes Using Triethylphosphate As Solvent

Effect of Additives on the Morphology and Performance of Symmetric Network PVDF Membranes

Influence of Dope Viscosity on the Fabrication of Pvdf Hollow Fiber Membranes with Single Skin Layer

Effects Of Peg Additives On Water Vapor Permeability Of Porous Pvdf Membranes

Effect of Additives in the Casting Solutions on the Morphology and Performance of Pvdf Membranes

Effect of Pore-Forming Agents on Structure and Properties of Pvdf/Pvc Blend Membranes

Effect of Additives on Morphology and Properties of Poly(vinylidene Fluoride) Membrane

Morphology and Performance of Polyvinylidene Fluoride/Perfluorosulphonic Acid Hollow Fibre Ultrafiltration Blend Membranes

Preparation And Characterizations Of Charged Poly(Vinyl Butyral) Hollow Fiber Ultrafiltration Membranes With Perfluorosulfonic Acid As Additive

Preparation of poly (vinyl butyral) hollow fiber ultrafiltration membrane via wet-spinning method using PVP as additive

Effect of Different Additives on Morphology and Properties of Poly(Vinylidene Fluoride) Membrane

Evolution Of The Precipitation Kinetics, Morphologies, Permeation Performances, And Crystallization Behaviors Of Polyvinylidenefluoride (Pvdf) Hollow Fiber Membrane By Adding Different Molecular Weight Polyvinylpyrrolidone (Pvp)

Preparation and characterization of Fe(Ⅲ)-Cu(Ⅱ)/PVDF hollow fiber membrane

Effect of Additives on Structure and Performance of PPBES Hollow Fiber Ultrafiltration Membranes

Preparation and characterization of Fe(III)-Cu(II)/PVDF hollow fiber membrane

Preparation of PVDF Porous Membranes by Using PVDF-g-PVP Powder As an Additive and Their Antifouling Property