Abstract:Polyvinylidenefluoride ( PVDF) hollow fiber membranes were fabricated by wet spinning (wet/wet) and dry-jet wet spinning (dry/wet; 3 cm air gap) processes with four types of polyvinylpyrrolidone (PVP) of different molecular weight as additives. Evolution of the precipitation kinetics, morphologies, permeation performances, and crystallization behaviors of the as-spun PVDF membranes were investigated. The PVDF membranes were well characterized by numerous state-of-the-art analytical techniques: scanning electron microscopy (SEM), X-ray diffraction (XRD), differential scanning calorimetry (DSC), thermogravimetric analysis (TGA) and attenuated total reflectance fourier Transform Infrared (FTIR-ATR) and elucidated accompanying with its precipitation kinetics obtained by light transmittance measurements. The precipitation kinetics results confirm that four PVDF/PVP/NMP dopes experience instantaneous demixing mechanism and the precipitation rate decreases as PVP molecular weight increases. Little peaks are found in the precipitation curves of the PVDF dopes containing PVP of low molecular weight. The SEM images indicate that the middle sponge-like layer sandwiched by double finger-like layers becomes thinner for the special precipitation behaviors. Visible large pores exist in the internal surfaces of the PVDF membranes spun by both wet/wet and dry/wet spinning processes. The increase in PVP molecular weight restricts the formation of large pores in the internal surfaces of the PVDF membranes for the increase in dope viscosity. The pure water permeability (PWP) of the as-spun PVDF membranes increases initially and then decreases as PVP molecular weight increases. The largest PWP flux of 316.7 Lm(-2) h(-1) bar(-1) is obtained for the PVDF membrane containing PVP K25 by wet/wet spinning process. The rejections for bovine serum albumin (BSA) by the as-spun PVDF membranes range from 35.4 to 82.9%. It illustrates that typical PVDF ultrafiltration membranes were obtained in this research. The melting temperature(T-m) of the PVDF hollow fiber membranes decreases with the increase in the PVP molecular weight as a whole. IR spectra and XRD patterns verify the exclusive formation of beta crystalline phase structure in the as-spun PVDF membranes. Copyright (C) 2010 John Wiley & Sons, Ltd.

Evolution of the precipitation kinetics, morphology, and permeation performance of phenolphthalein poly(ether sulfone) hollow-fiber membranes with polyvinylpyrrolidones of different molecular weights as additives

Effect of polyethylene glycol molecular weights and concentrations on polyethersulfone hollow fiber ultrafiltration membranes

Preparation and Characterazition of Poly(Phthalazinone Ether Sulfone Ketone) Hollow Fiber Ultrafiltration Membrane with High-Molecular Weight Cut-Off

Polyethersulfone (PES) hollow fiber ultrafiltration membranes prepared by PES/non-solvent/NMP solution

Preparation and Performance of Polyethersulfone Hollow-Fiber Membrane

Preparation and Permeation Performances of Phenolphthalein Polyethersulphone Cardo（PES-C） Ultrafiltration Membranes

Pregelation of Sulfonated Polysulfone and Water for Tailoring the Morphology and Properties of Polyethersulfone Ultrafiltration Membranes for Dye/salt Selective Separation

Effect of Polyethersulfone Molecular Weight on Structure and Performance of Ultrafiltration Membranes

Preparation and characterization of asymmetric polyethersulfone nanofiltration membranes: The effects of polyvinylpyrrolidone molecular weights and concentrations

Effects of Dope Compositions on the Structure and Performance of PPES Hollow Fiber Ultrafiltration Membranes

Preparation Of Micro-Porous Polyethersulphone Hollow Fibre Membranes Using Non-Solvent Vapour-Induced Phase Separation

Improved Antifouling Property of Poly(Ether Sulfone) Ultrafiltration Membrane Through Blending with Poly(Vinyl Alcohol)

Evolution Of The Precipitation Kinetics, Morphologies, Permeation Performances, And Crystallization Behaviors Of Polyvinylidenefluoride (Pvdf) Hollow Fiber Membrane By Adding Different Molecular Weight Polyvinylpyrrolidone (Pvp)

Preparation And Characterizations Of Charged Poly(Vinyl Butyral) Hollow Fiber Ultrafiltration Membranes With Perfluorosulfonic Acid As Additive

Morphology and characteristics of polyethersulfone membrane modified with polyethylene glycol hexadecyl ether and nanocarbon

Separation performance enhancement of PEEKWC/PEI cross-linked ultrafiltration membranes by poly(ethylene glycol) and polyvinylpyrrolidone as polymeric additives

Morphology and Performance of Polyvinylidene Fluoride/Perfluorosulphonic Acid Hollow Fibre Ultrafiltration Blend Membranes

Preparation of novel PPES-B UF membrane with good thermal stability: The effect of additives on membrane performance and cross-section morphology

Investigating the Impact of the Sulfonation Degree in Sulfonated Polyphenylsulfone (sPPSU) on PES/sPPSU Polymer Blend Membranes

Effects of PES support layer structure on pervaporation performances of PDMS/PES hollow fiber composite membranes

Synthesis and Characterization of Sulfonated Poly(phthalazinone Ether Sulfone Ketone) for Ultrafiltration and Nanofiltration Membranes