Abstract:Polyvinylidenefluoride ( PVDF) hollow fiber membranes were fabricated by wet spinning (wet/wet) and dry-jet wet spinning (dry/wet; 3 cm air gap) processes with four types of polyvinylpyrrolidone (PVP) of different molecular weight as additives. Evolution of the precipitation kinetics, morphologies, permeation performances, and crystallization behaviors of the as-spun PVDF membranes were investigated. The PVDF membranes were well characterized by numerous state-of-the-art analytical techniques: scanning electron microscopy (SEM), X-ray diffraction (XRD), differential scanning calorimetry (DSC), thermogravimetric analysis (TGA) and attenuated total reflectance fourier Transform Infrared (FTIR-ATR) and elucidated accompanying with its precipitation kinetics obtained by light transmittance measurements. The precipitation kinetics results confirm that four PVDF/PVP/NMP dopes experience instantaneous demixing mechanism and the precipitation rate decreases as PVP molecular weight increases. Little peaks are found in the precipitation curves of the PVDF dopes containing PVP of low molecular weight. The SEM images indicate that the middle sponge-like layer sandwiched by double finger-like layers becomes thinner for the special precipitation behaviors. Visible large pores exist in the internal surfaces of the PVDF membranes spun by both wet/wet and dry/wet spinning processes. The increase in PVP molecular weight restricts the formation of large pores in the internal surfaces of the PVDF membranes for the increase in dope viscosity. The pure water permeability (PWP) of the as-spun PVDF membranes increases initially and then decreases as PVP molecular weight increases. The largest PWP flux of 316.7 Lm(-2) h(-1) bar(-1) is obtained for the PVDF membrane containing PVP K25 by wet/wet spinning process. The rejections for bovine serum albumin (BSA) by the as-spun PVDF membranes range from 35.4 to 82.9%. It illustrates that typical PVDF ultrafiltration membranes were obtained in this research. The melting temperature(T-m) of the PVDF hollow fiber membranes decreases with the increase in the PVP molecular weight as a whole. IR spectra and XRD patterns verify the exclusive formation of beta crystalline phase structure in the as-spun PVDF membranes. Copyright (C) 2010 John Wiley & Sons, Ltd.

EFFECTS OF POLYMER MOLECULAR WEIGHT ON PVDF MICROFILTRATION MEMBRANE PERFORMANCE BY IMMERSION PRECIPITATION PHASE INVERSION

EFFECTS OF CASTING CONDITIONS ON PVDF MICROFILTRATION MEMBRANE PERFORMANCE BY IMMERSION PRECIPITATION PHASE INVERSION

Effects of Preparing Condition on PVDF Membrane Morphology

Effect of Polymer Molecular Weight on the Morphology and Crystallization of Prepared PVDF Membranes

Polymorphism in Porous Poly(vinylidene Fluoride) Membranes Formed Via Immersion Precipitation Process

Modification of Porous Poly(Vinylidene Fluoride) Membrane Using Amphiphilic Polymers with Different Structures in Phase Inversion Process

Influence of Solvents on the PVDF Membrane Properties

Effects of Polymer Concentration on PES Microfiltration Membrane Performance by Immersion Precipitation Phase Inversion

Effect of the molecular weight and its distribution of polyvinylidene fluoride on the relationship between the spinning process, microstructure and properties of hollow fiber membranes via thermally induced phase separation

Effect of Polymer Molecular Weight on Structure and Performance of PVDF Hollow Fiber Membranes Prepared Via TIPS Process with Co-Extrusion of Solvent Using Triple Orifice Spinneret

INFLUENCE OF ALCOHOL-BASED NONSOLVENTS ON THE FORMATION AND MORPHOLOGY OF PVDF MEMBRANES IN PHASE INVERSION PROCESS

Evolution Of The Precipitation Kinetics, Morphologies, Permeation Performances, And Crystallization Behaviors Of Polyvinylidenefluoride (Pvdf) Hollow Fiber Membrane By Adding Different Molecular Weight Polyvinylpyrrolidone (Pvp)

Effects of solvent compositions on physicochemical properties and anti-fouling ability of PVDF microfiltration membranes for wastewater treatment

Morphology and Formation Mechanism of Poly(Vinylidene Fluoride) Membranes Prepared with Immerse Precipitation: Effect of Dissolving Temperature

Influence of Dope Viscosity on the Fabrication of Pvdf Hollow Fiber Membranes with Single Skin Layer

Study on PVDF Ultrafiltration Membrane Experiment Preparation and Membrane Formation Mechanism

PVDF Membrane Morphology—Influence of Polymer Molecular Weight and Preparation Temperature

Effect of polyvinylpyrrolidone on the morphology and properties of polyetherimide ultra-filtration membranes

Improved Performance of Poly(Vinylidene Fluoride) Microfiltration Membranes Prepared by Freeze and Immersion Precipitation Coupling Method

Effect of polymer concentration and coagulation bath on the performance of PES/PMMA ultrafiltration membranes

Effect of Additives on Morphology and Properties of Poly(vinylidene Fluoride) Membrane