Abstract:Iron oxides supported on TiO2 catalysts show good activity in selective catalytic reduction (SCR) of NOx by ammonia. In this work, Fe-2(SO4)(3)/TiO2 and other catalysts containing iron and sulfates were prepared by the impregnation method and their activities for SCR of NOx by ammonia were investigated On Fe-2(SO4)(3)/TiO2 catalyst, NOx conversion reached 98.0% in the temperature range of 350-450 degrees C, while yielding little N2O. Characterization results showed that alpha-Fe2O3 and sulfates were mainly formed on the Fe-2(SO4)(3)/TiO2 catalyst. Iron oxide catalysts with sulfates [e.g., Fe-2(SO4)(3)/TiO2] caused more dispersed iron phase, and the sulfation effect might have mostly occurred on iron oxides but not TiO2. In contrast, Fe(NO3)(3) precursor supported on TiO2 without sulfates led to the Fe2O3 particle products, which physically connected to the surface of TiO2 and resulted in some agglomerations or heterogeneous distribution of Fe2O3 particles. In addition, sulfates played an important role in the SCR reactions, which were responsible for strong Bronsted acid sites. The SCR reaction mechanism on Fe-2(SO4)(3)/TiO2 might have taken place as follows: NH3 was adsorbed onto the surface of Fe-2(SO4)(3)/TiO2 and mainly formed NH4+ on Bronsted acid sites. NO was oxidized to NO2 by the oxygen in the reaction gas or on the iron oxide sites of the catalyst. Then, nitrates originated from NO2 were generated on Fe-2(SO4)(3)/TiO2 catalyst for NH3-SCR reaction. Finally, an active intermediate species like ammonium nitrite was formed, which eventually decomposed to gaseous nitrogen.

Temperature-Dependent Effects of SO2 on Selective Catalytic Reduction of NO over Fe–Cu–OX/CNTs–TiO2 Catalysts

Insights into the Effects of Sulfate Species on CuO/TiO2 Catalysts for NH3-SCR Reactions

Tailoring the Proceeding of the NH3-SCO and NH3-SCR Reactions over FeOx Catalysts by Modifying with NbOx

Relationship between SO2 poisoning effects and reaction temperature for selective catalytic reduction of NO over Mn–Ce/TiO2 catalyst

Influences of SO2 on the Catalytic Effect for Selective Catalytic Reduction of NO by NH3 over Iron-based Sulfates

Activation of Fast Selective Catalytic Reduction of NO by NH3 at Low Temperature over TiO2 Modified CuOX-CeOX Composites

SO2Poisoning Behaviors of Ca-Mn/TiO2Catalysts for Selective Catalytic Reduction of NO with NH3at Low Temperature

Low Temperature Selective Catalytic Reduction of NO over Manganese Supported on TiO2 Nanotubes

Temperature sensitivity of the selective catalytic reduction (SCR) performance of Ce-TiO2 in the presence of SO2

Selective catalytic reduction of NO by NH3 over CuO–CeO2 in the presence of SO2

Dual Effect of Sulfation on the Selective Catalytic Reduction of NO with NH3 over MnOx/TiO2: Key Factor of NH3 Distribution

The Effects of H2o and So2 on the Behaviour of Cuso4-Ceo2/Ts for Low Temperature Catalytic Reduction of No with Nh3

Catalytic Reduction of NO by NH3 over Fe–Cu–OX/CNTs-TiO2 Composites at Low Temperature

Temperature dependence of reaction mechanisms and SO 2 tolerance over a promising monolithic CuY catalyst for NO removal

Simultaneous removal of NO x and SO 2 by low-temperature selective catalytic reduction over modified activated carbon catalysts

Interaction between SO2 and Fe–Cu–Ox/CNTs–TiO2 catalyst and its influence on NO reduction with NH3

Boosting SO2-Resistant NOx Reduction by Modulating Electronic Interaction of Short-Range Fe-O Coordination over Fe2O3/TiO2 Catalysts

Catalytic Performance, Characterization, and Mechanism Study of Fe-2(So4)(3)/Tio2 Catalyst for Selective Catalytic Reduction of Nox by Ammonia

Unraveling the Unexpected Offset Effects of Cd and SO2 Deactivation over CeO2-WO3/TiO2 Catalysts for NOx Reduction

DRIFT Study of the SO<sub>2</sub>Effect on Low-Temperature SCR Reaction over Fe−Mn/TiO<sub>2</sub>

Study on SO 2 Poisoning and Regeneration of the Low-Temperature Fe–Sn–Mn/TiO 2 Catalyst for Simultaneous Removal of NO x and Mercury