Abstract:A zirconium and a zirconium/boron containing single-source precursor were synthesized via chemical modification of a commercially available polysilazane (Durazane 1800) with tetrakis (dimethylamido) zirconium (IV) (TDMAZ) as well as with both TDMAZ and borane dimethyl sulfide complex, respectively. The polymer-to-ceramic transformation of the precursors into SiZrCN and SiZrBCN ceramics as well as the thermal evolution of their phase composition and microstructure was studied. The pyrolysis of the precursors led to the formation of amorphous SiZrCN and SiZrBCN ceramics. Interestingly, the as prepared SiZrBCN ceramic was single-phasic and fully featureless; whereas SiZrCN exhibited the presence of nano-sized ZrO2 particles; however, only very localized in close proximity to internal surfaces. Heat treatment at higher temperatures induced crystallization processes in both prepared ceramics. Thus, at temperatures beyond 1500 degrees C, cubic ZrCxNy, beta-Si3N4 as well as beta-SiC were generated. It was shown that the incorporation of B into SiZrCN suppressed the crystallization of ZrCxNy and, in addition, impeded the reaction of SiNx with C, resulting in an improved thermal stability of SiZrBCN compared to SiZrCN ceramic. Moreover boron was shown to be mainly located in the sp(2)-hybridized "free" carbon present in SiZrBCN, forming a turbostratic BCN phase which has been unequivocally detected by means of high-resolution transmission electron microscopy (HRTEM) and energy-dispersive X-ray spectroscopy (EDS).

Synthesis of Spherical (30 Nm) and Rod-Like (200 Nm) Zirconia Co-Reinforced Mullite Nanocomposites

Nano-Zirconia/Mullite Composite Ceramics Prepared By In-Situ Controlled Crystallization From The Si-Al-Zr-O Amorphous Bulk

Preparation of Nano-Composite ZTM Ceramics of High Mechanical Properties by In-Situ Crystallization of Amorphous Bodies

Microstructure and Mechanical Properties of SiC/zirconia-toughened Mullite Nanocomposites Prepared from Mixtures of Mullite Gel, 2Y-TZP, and SiC Nanopowders

Mechanical Properties and Structure of Zirconia-Mullite Ceramics Prepared by In-Situ Controlled Crystallization of Si-Al-Zr-O Amorphous Bulk

Microstructure and Properties of Zirconia-Mullite Nanocomposites Obtained from Si-Al-Zr-O Amorphous Bulks Doped with CaO and MgO

Synthesis of Monolithic Zirconia with Macroporous Bicontinuous Structure Via Epoxide-Driven Sol–gel Process Accompanied by Phase Separation

Hydrothermal Synthesis and Characterization of Zirconia Nanocrystallites

Microstructure and Mechanical Properties of SiC/Mullite and SiC/ZTM Nanocomposites

Structural evolution of ZrO2-mullite nanocomposites from the Si-Al-Zr-O amorphous bulk

Structure and Mechanical Properties of ZrO 2 -Mullite Nano-Ceramics in SiO 2 -Al 2 O 3 -Zro 2 System

Preparation of ZrO2-mullite Nano-Composite Ceramics

Structure and Mechanical Properties of ZrO_2-mullite Nano-Ceramics in SiO_2-Al_2O_3-ZrO_2 System

High-temperature phase and microstructure evolution of polymer-derived SiZrCN and SiZrBCN ceramic nanocomposites

Microstructure and Mechanical Property of Zirconia Nanocomposites

Optimization of the structure and morphology of monoclinic phase nanoscale zirconium dioxide

From design to characterization of zirconium nitride/silicon nitride nanocomposites

Zirconia Reinforced Reaction Bonded Silicon Carbide Composites: Microstructure and Mechanical Properties

Effects of heat-treatment temperature on structure and mechanical properties of ZrO2-mullite nano-composite ceramics fabricated by in-situ crystallization

Preparation and Mechanical Properties of Zirconia-Mullite Nano-Comoposites from TiO2-Doped Si-Al-Zr-O Amorphous Bulk

Study on In-situ Synthesizing Zirconia-mullite Composites From Zircon