Abstract:The magnesium reduction process occurring in a retort as described in Part I is carried out in a refractory brick coal-fired furnace. It is considered that the thermal-flow inside the furnace has an important effect on the heat transfer and reduction of the reactive compound in the retort. In this paper, a comprehensive two-dimensional unsteady model was developed in combination of the magnesium reduction model put forward in Part I with the conventional gas-particle turbulent flow and combustion models. The set of equations was solved by the time-marching method. The prediction revealed the flow characteristics and temperature distribution in the furnace, and the magnesium reduction rate distribution in the retort. Variation of the total magnesium reduction rate with the time was also presented, which is useful for the design and operation of the magnesium reduction system. NOMENCLATURE cp Effective specific heat capacity of the reactant Cp Coal particle specific heat capacity Fd Drag force Fg Gravitational force mp Coal particle mass Qc Convective heat transfer between particle and gas phase Qm Coal combustion heat Qr Radiative heat transfer between particle and gas phase Sr Reaction source term Sφ Source term in Eq. (4) Sφp Source term representing the interaction between coal particle and gas phase in Eq. (4) Tp Coal particle mass up Coal particle velocity u Gas velocity ρ Effective density λ Effective thermal conductivity φ Universal variable in Eq. (4) Γφ Generalize diffusion coefficient in Eq. (4) INTRODUCTION The magnesium production process is carried out in a traditional coal-fired furnace, as shown in Figure 1 (Xu, 2003). Several retorts(5~11) are horizontally placed in the upper and lower rows with a staggered layout in the refractory brick furnace, which are heated by high temperature flue gas(1200~1250°C) from the combustion chamber arranged symmetrically on two sides of the furnace. The magnesium reduction process occurs in the retort. The high temperature flue gas flows out via the outlets at the bottom of the furnace to preheat the inlet air. Figure 1: Cross-section schematic diagram of coal-fired furnace for magnesium production In Part I (Li et al., 2009), we established the magnesium reduction model in the retort according to the actual physical process, and analyzed in detail the behavior of performance of the magnesium reduction process, such as temperature distribution, magnesium reduction rate and heat absorption power, with the time. The influence of heating temperature on the magnesium reduction rate and the heat absorption power was also investigated. However, the heat transfer occurred on the surface of the retort placed in the furnace involves not only the heat conduction but also the convective and radiative heat transfer. Therefore, the objective of this paper is to develop a comprehensive unsteady model in combination with the magnesium reduction model put forward in Part I and with the conventional coal combustion models, and to investigate the effect of thermal-flow field on the performance of the magnesium reduction process in terms of temperature and reduction rate profiles in the retort, and the variation of total reduction rate with the time.

Numerical study of magnesium (Mg) production by the Pidgeon process: Impact of heat transfer on Mg reduction process

Numerical simulation of magnesium production by the pidgeon process part ii : coupling of the magnesium reduction in the retorts with the surrounding thermal-flow fields in a coal-fired furnace

Experimental and Numerical Modeling Studies on Production of Mg by Vacuum Silicothermic Reduction of CaO·MgO

Numerical Study of Magnesium Production by Pidgeon Process and Pre-prepared Pellets Silicothermic Process: Comparison of Heat Transfer

Coupled Heat Transfer and Chemical Reactions in Magnesium Production Retorts

Experimental Study of Magnesium (Mg) Production by an Integrated Calcination and Silicothermic Reduction Short Process

Experimental and Numerical Studies on A One-Step Method for the Production of Mg in the Silicothermic Reduction Process

Reaction characteristics of magnesium production under argon flow by silicothermic reduction and numerical simulation of argon entrainment process

Thermodynamic Analysis and Processing Evaluation of Magnesium Preparation by Thermal Reduction Method

Experimental and Numerical Studies on Heat Transfer Enhancement in the Silicothermic Reduction Process

Kinetics of extracting magnesium from prefabricated pellets by silicothermic process under flowing argon atmosphere

Research on the Process, Energy Consumption and Carbon Emissions of Different Magnesium Refining Processes

Systematic kinetic study of magnesium production using magnesium oxide and carbonic materials at different temperatures

Review on the Silicothermic Process for Primary Magnesium Production

A New Kind of Crude Magnesium Extraction Process and Device

Numerical Analysis of the Gas − Solid Heat Transfer Characteristics of a Lightly Calcined MgO Fluidized-bed Roaster

Numerical Investigation of the Limit of Coke Rate Reduction in an Ironmaking Blast Furnace (BF)

Numerical Study of the Reduction Process in an Oxygen Blast Furnace

Numerical Investigation of Gas-Solid Heat Transfer Process and Parameter Optimization in Shaft Kiln for High-Purity Magnesia

Modeling of Multiprocess Behavior for Feedstock-Mixed Porous Pellet: Heat and Mass Transfer, Chemical Reaction, and Phase Change

Comparative evaluation of energy and resource consumption for vacuum carbothermal reduction and Pidgeon process used in magnesium production