Abstract:The magnesium reduction process occurring in a retort as described in Part I is carried out in a refractory brick coal-fired furnace. It is considered that the thermal-flow inside the furnace has an important effect on the heat transfer and reduction of the reactive compound in the retort. In this paper, a comprehensive two-dimensional unsteady model was developed in combination of the magnesium reduction model put forward in Part I with the conventional gas-particle turbulent flow and combustion models. The set of equations was solved by the time-marching method. The prediction revealed the flow characteristics and temperature distribution in the furnace, and the magnesium reduction rate distribution in the retort. Variation of the total magnesium reduction rate with the time was also presented, which is useful for the design and operation of the magnesium reduction system. NOMENCLATURE cp Effective specific heat capacity of the reactant Cp Coal particle specific heat capacity Fd Drag force Fg Gravitational force mp Coal particle mass Qc Convective heat transfer between particle and gas phase Qm Coal combustion heat Qr Radiative heat transfer between particle and gas phase Sr Reaction source term Sφ Source term in Eq. (4) Sφp Source term representing the interaction between coal particle and gas phase in Eq. (4) Tp Coal particle mass up Coal particle velocity u Gas velocity ρ Effective density λ Effective thermal conductivity φ Universal variable in Eq. (4) Γφ Generalize diffusion coefficient in Eq. (4) INTRODUCTION The magnesium production process is carried out in a traditional coal-fired furnace, as shown in Figure 1 (Xu, 2003). Several retorts(5~11) are horizontally placed in the upper and lower rows with a staggered layout in the refractory brick furnace, which are heated by high temperature flue gas(1200~1250°C) from the combustion chamber arranged symmetrically on two sides of the furnace. The magnesium reduction process occurs in the retort. The high temperature flue gas flows out via the outlets at the bottom of the furnace to preheat the inlet air. Figure 1: Cross-section schematic diagram of coal-fired furnace for magnesium production In Part I (Li et al., 2009), we established the magnesium reduction model in the retort according to the actual physical process, and analyzed in detail the behavior of performance of the magnesium reduction process, such as temperature distribution, magnesium reduction rate and heat absorption power, with the time. The influence of heating temperature on the magnesium reduction rate and the heat absorption power was also investigated. However, the heat transfer occurred on the surface of the retort placed in the furnace involves not only the heat conduction but also the convective and radiative heat transfer. Therefore, the objective of this paper is to develop a comprehensive unsteady model in combination with the magnesium reduction model put forward in Part I and with the conventional coal combustion models, and to investigate the effect of thermal-flow field on the performance of the magnesium reduction process in terms of temperature and reduction rate profiles in the retort, and the variation of total reduction rate with the time.

Numerical Investigation of Gas-Solid Heat Transfer Process and Parameter Optimization in Shaft Kiln for High-Purity Magnesia

Numerical Study of Particle Behaviours and Heat Transfer in a Complex Rotary Kiln

Numerical simulation of gas-solid heat transfer and moisture evaporation process in preheating shaft kiln for ferromagnesium pellets

Numerical Analysis of the Gas − Solid Heat Transfer Characteristics of a Lightly Calcined MgO Fluidized-bed Roaster

Study on Gas-Solid Heat Transfer and Decomposition Reaction of Calcination Process in an Annular Shaft Kiln Based on the Finite Volume Method

Numerical Simulation Study of Gas-Solid Heat Transfer and Decomposition Processes of Limestone Calcined with Blast Furnace Gas in a Parallel Flow Regenerative Lime Kiln

Effect of Swirling Gas Inlet Design on Particle Motion and Decomposition in Magnesite Flash Calciner

Parameter Optimization of Gas–solid Heat Transfer Process in Sinter Packed Bed Based on Further Exergy Analysis

Investigating the general mathematics model of gas-solid heat transfer in the cooling process of high temperature clinker and sintered material

Numerical Evaluation and Parameter Optimization of Bischofite Pyrolysis: A New Approach to Solid Waste Treatment

Numerical study of magnesium (Mg) production by the Pidgeon process: Impact of heat transfer on Mg reduction process

Numerical simulation of the influence factors for rotary kiln in temperature field and stress field and the structure optimization

Numerical Investigations on the Enhancement of Convective Heat Transfer in Fast-Firing Brick Kilns

Numerical study and orthogonal analysis of optimal performance parameters for vertical cooling of sintered ore

Numerical simulation and optimization of the multi-stage air/gas supply system in a coke oven battery with 7.1 m coking chambers

Numerical investigation of heat transfer in the clinker cooling process of grate cooler

Numerical simulation of magnesium production by the pidgeon process part ii : coupling of the magnesium reduction in the retorts with the surrounding thermal-flow fields in a coal-fired furnace

A Study of a Two-Phase Heat Transfer Mechanism in a Vertical Sintering Cooling Furnace

Numerical study of gas–solid counterflow heat transfer in sinter vertical cooling furnace based on energy and exergy analysis

Parameters effect and optimization on calciner for treating magnesium salt based on computational fluid dynamics

Numerical Analysis of Radiative Heat Transfer and Direct Reduction of Three-Dimensional Multilayer Ellipsoidal Carbon-Containing Pellet Unit in the Rotary Hearth Furnace