Abstract:Colloidal suspensions of nanoparticles (e.g., metals and oxides) have been considered as a promising working fluid in microreactors for achieving significant process intensification. Existing examples include their uses in microflow as catalysts for enhancing the reaction efficiency, or as additives to mix with the base fluid (i.e., to form the so-called nanofluids) for heat/mass transfer intensification. Thus, hydrodynamic characterization of such suspension flow in microreactors is of high importance for a rational design and operation of the system. In this work, experiments have been conducted to investigate the flow pattern and pressure drop characteristics under slug flow between N 2 gas and colloidal suspensions in the presence of TiO 2 or Al 2 O 3 nanoparticles through polytetrafluoroethylene (PTFE) capillary microreactors. The base fluid consisted of water or its mixture with ethylene glycol. The slug flow pattern with nanoparticle addition was characterized by the presence of a lubricating liquid film around N 2 bubbles, in contrast to the absence of liquid film in the case of N 2 -water slug flow. This shows that the addition of nanoparticles has changed the wall wetting property to be more hydrophilic. Furthermore, the measured pressure drop under N 2 -nanoparticle suspension slug flow is well described by the model of Kreutzer et al. (AIChE J 51(9):2428–2440, 2005) at the mixture Reynolds numbers ca. above 100 and is better predicted by the model of Warnier et al. (Microfluidics and Nanofluidics 8(1):33–45, 2010) at lower Reynolds numbers given a better consideration of the effect of film thickness and bubble velocity under such conditions in the latter model. Therefore, the employed nanoparticle suspension can be considered as a stable and pseudo single phase with proper fluid properties (e.g., viscosity and density) when it comes to the pressure drop estimation.

Characterization of Fluid Resistance in Nanostructured TiO2 (NST) Film

Stability and thermal conductivities of hybrid sphere/tube TiO2 nanofluid

Dispersion Stability of Tio2-H2o Nanofluids Containing Mixed Nanotubes and Nanosheets

Improved Dispersion Stability of Water-Based Tio2 Nanofluids Through Combined Effects of Nanoparticle Mixing and Dispersant Addition

Stability of TiO 2 Nanoparticles in Deionized Water with ZrP Nanoplatelets

Design and fabrication of a nanofluidic channel by selective thermal oxidation and etching back of silicon dioxide made on a silicon substrate

Convective Heat Transfer and Resistance Characteristics of Nanofluids with Cylindrical Particles

Understanding Interfacial Dynamics: Hydrostatic Pressure-Induced Sono-Dispersion of Carbon Nanotubes

Water Transport Phenomena Through Membranes Consisting of Vertically-Aligned Double-Walled Carbon Nanotube Array

Structural and Hydrophilic Properties of TiN Films Prepared by Ultrasonic Atomization Assisted Spray Method under Low Temperature

A Numerical Investigation of the Flow of Nanofluids Through a Micro Tesla Valve

Characterization of Nanostructured Titania Thin Film and Its Application in Gas Sensor

Enhanced Capillarity In Microchannels Coated With Nanoscale Porous Titanium Dioxide

Gas–Liquid Slug Flow Studies in Microreactors: Effect of Nanoparticle Addition on Flow Pattern and Pressure Drop

Synthesis Of Large Area Crack-Free Nanostructured Tio2 With Selective Masking For Cell/Electronics Interfacing

Electrorheological Characterization of Ultrathin Titanium Dioxide Nanorods Solutions Using Microfluidics

Fabrication Of Nanostructured Titania Thin Film At Low Temperature

Forced Convection Nanofluid Heat Transfer as a Function of Distance in Microchannels

Effect of temperature and nanoparticle size on the interfacial layer thickness of TiO 2 –water nanofluids using molecular dynamics

Interface Characterization and Scratch Resistance of Plasma Sprayed TiO2-CNTs Nanocomposite Coating

Microstructure, mechanical properties, and corrosion resistance of TiSiN coating prepared by FCVA technique with different N 2 flow rates