Abstract:This paper presents characterization and compensation of the thermal bias drift of a MEMS accelerometer whose effective stiffness is electrostatically tuned to a low value with the help of the single-sided parallel plates (SSPPs) capacitors. A temperature drift model for the proposed accelerometer is built and the temperature effect on the mechanical stiffness and the circuit gains is characterized. The characterization reveals that the variations of the feedforward coefficient including the mechanical stiffness and the readout gain due to the temperature change play a significant role in the bias drift of output of the proposed closed-loop accelerometer. On the other hand, the variations of both feedback gain and tuning gain as a function of temperature are one-order-of-magnitude less than that of the feedforward coefficient. To calibrate the feedforward coefficient, an excitation signal as a form of AC reference displacement is introduced to drive the proof mass and the readout response is demodulated to calibrate the variance of the feedforward coefficient correspondingly. An open-loop compensation scheme for the temperature-induced bias drift using the variance of the calibrated response is proposed accordingly. Alternatively, the calibrated response can be controlled to a preset value by a new proportion integral derivative (PID) controller by the adjustment of the SSPP tuning voltage. The output of the PID controller is used for the calibration of the introduced bias from the electrostatic tuning force. Therefore, a closed-loop compensation of the thermal bias drift is achieved by remaining the feedforward coefficient while eliminating the calibrated bias. Experiments under a temperature cooling process and different tuning voltages are carried out to verify two proposed compensation schemes. The temperature drift coefficients (TDCs) of both compensated outputs exhibit at least one-order-of-magnitude reduction in response to the temperature change. When the effective stiffness of the accelerometer is tuned to about 4.19 N m(-1), the TDC of the compensated output using the proposed open-loop or closed-loop compensation schemes is reduced to about 0.1136 or 0.0391 mg degrees C-1, respectively and meanwhile, the Allan bias instability is slightly increased to 48.63 or 56.14 mu g, respectively.

Research on the magnetic cylinder temperature stability control method of electromagnetic force balance sensor

Research on the Temperature Characteristic of Magnetic Sensor in the Magnetic Drift Compensation Fiber-Optic Gyroscope

Characterization and Compensation of Thermal Bias Drift of a Stiffness-Tunable MEMS Accelerometer

A Real-Time Temperature Compensation Algorithm for a Force-Rebalanced MEMS Capacitive Accelerometer Based on Resonant Frequency.

Temperature Drift Compensation of a Tuned Low Stiffness MEMS Accelerometer Based on Double-Sided Parallel Plates

Temperature Bias Drift Phase-Based Compensation for a MEMS Accelerometer with Stiffness-Tuning Double-Sided Parallel Plate Capacitors

Research on Methods of Thermal Error Compensating and Restraining in Giant Magnetostrictive Actuator

A Novel Triple-Actuator Magnetic Suspension Balance System With Enhanced Load and Stability

Temperature Compensation Method for Tunnel Magnetoresistance Micro-Magnetic Sensors Through Reference Magnetic Field

Amplitude Control Method of Magnetic Flux Vertical Modulation Structure for TMR Magnetic Sensor Based on Harmonic Component of Modulated Signal

Research on the Feasibility of Eddy Current Displacement Sensor with Temperature Variation for Non-Ferromagnetic Detection Material

The national agenda for Healthcare Associated Infection, Antimicrobial Resistance and Infection Prevention and Control in Scotland: Structures, current priorities and programmes

MEMS Accelerometer Stability and Temperature Compensation for Long Term Structure Surveillance System

Temperature Drift Compensation for a High Pressure Eddy Current Displacement Sensor

Linear Compensation to Thermal Bias Drift of MEMS Accelerometer Based on Temperature Measurement Circuit

Temperature drift suppression for micro‐electro‐mechanical system gyroscope based on vibrational‐displacement control with harmonic amplitude ratio

A Magnetic Damping Device For Watt And Joule Balances

Study on High Precision Magnetic Encoder Based on Pmsm Sensorless Control

Simultaneous Temperature Drift Compensation for Eddy Current Displacement Sensors Used in Magnetically Levitated Rotor

Research on Low Temperature Drift Suppression of Micro-Machined Gyroscope Based on Self-Calibration Technology

In-Situ Compensation on Temperature Coefficient of the Scale Factor for a Single-Axis Nano-g Force-Balance MEMS Accelerometer