Abstract:The time-of-flight (TOF) mass spectrometry is one of the most widely used techniques to get information about the composition and structure of compounds. The time digitizer, based on time-to-digital conversion, is one of the important parts in modern TOF mass spectrometry, which is often implemented with analog circuitry or application-specific-integrated-circuit (ASIC) devices. However, it is difficult to achieve a high density with the analog approach. Furthermore, ASIC requires a long design cycle and the function cannot be easily revised for different applications. In this work, we present a highly flexible, accurate, yet low-costing design of time digitizer which is based on a field-programmable-gate-array (FPGA) and time interpolation method. Test results indicate that the bin size of this time digitizer is 390 ps with an average standard deviation (about 150 ps). The differential nonlinearity is in the range of -0.10 to +0.05 LSB (least significant bit), and the measurement time range is larger than 107 s. Compared with other techniques, it reduces the system complexity while providing a good flexibility. In addition, this technique can also accommodate one or more STOP pulse measurements for each START pulse reference, enabling measurement of multiple times-of-flight with a common start trigger. Besides, a time stamp is recorded for each input pulse, rendering this time digitizer versatile in other applications. Moreover, because of the programmable characteristic of a FPGA, more functions can be integrated in the time digitizer, such as a trigger function, data transfer interface; the parameters such as the number of the channels. The measurement range can also be modified according to different requirements.

A Time-to-digital Converter Used in Photon-Counting LIDAR

A Two-Step Time-to-Digital Converter with 5.6ps Resolution and 1 - 4255μs Measurement Range

A 50-Ps Gated VCRO-Based TDC with Compact Phase Interpolators for Flash LiDAR

A 49.5 Μw Multichannel Time-to-Digital Converter with 2D/3D Imaging Fusion for APD LiDAR Sensors

Low-cost FPGA-based multi-channel TDC with high resolution and density for time-of-flight detectors

Design and Implementation of a Time to Digital Convertor (TDC) Circuit Based on FPGA in Positioning Technology

An Fpga-Integrated Time-To-Digital Converter Based on A Ring Oscillator for Programmable Delay Line Resolution Measurement

Time of flight measurements with picoseconds resolution in laser altimetry

A time-to-digital converter with steady calibration through single-photon detection

FPGA Based Pico-second Time Measurement System for a DIRC-like TOF Detector

Photonic-Assisted Time-Interleaved Adc Based on Optical Delay Line

High Resolution Electronics for a Position Sensitive MCP Delay-line Detector

Design of Time-to-Digital Converters for Time-Over-Threshold Measurement in Picosecond Timing Detectors

An FPGA-based, High-Precision, Narrow Pulse Width Measurement Time-to-digital Converter

Carry chain based multi-channel time-to-digital converter

A High Resolution Time-to-digital-convertor Based on a Carry-Chain and DSP48E1 Adders in a 28-Nm Field-Programmable-gate-array

Time-of-flight measurements with TDC-GP1 in laser altimeter

Low-Cost FPGA TDC with High Resolution and Density

A Field-Programmable-Gate-Array Based Time Digitizer for the Time-Of-Flight Mass Spectrometry

A 1.15-Ps Bin Size and 3.5-Ps Single-Shot Precision Time-to-Digital Converter with On-Board Offset Correction in an FPGA

A 128-Channel High Performance Time-to-Digital Converter Implemented in an UltraScale FPGA