Strain Relaxation In Ingan/Gan Micro-Pillars Evidenced By High Resolution Cathodoluminescence Hyperspectral Imaging

Enyuan Xie,Zhizhong Chen,Paul R. Edwards,Zheng Gong,Ningyang Liu,Yuebin Tao,Yanfeng Zhang,Yu Chen,Ian M. Watson,Erdan Gu,Robert W. Martín,Guoyi Zhang,Martin D. Dawson
DOI: https://doi.org/10.1063/1.4733335
IF: 2.877
2012-01-01
Journal of Applied Physics
Abstract:A size-dependent strain relaxation and its effects on the optical properties of InGaN/GaN multiple quantum wells (QWs) in micro-pillars have been investigated through a combination of high spatial resolution cathodoluminescence (CL) hyperspectral imaging and numerical modeling. The pillars have diameters (d) ranging from 2 to 150 mu m and were fabricated from a III-nitride light-emitting diode (LED) structure optimized for yellow-green emission at similar to 560 nm. The CL mapping enables us to investigate strain relaxation in these pillars on a sub-micron scale and to confirm for the first time that a narrow (similar to 2 mu m) edge blue-shift occurs even for the large InGaN/GaN pillars (d > 10 mu m). The observed maximum blue-shift at the pillar edge exceeds 7nm with respect to the pillar centre for the pillars with diameters in the 2-16 mu m range. For the smallest pillar (d = 2 mu m), the total blue-shift at the edge is 17.5 nm including an 8.2 nm "global" blue-shift at the pillar centre in comparison with the unetched wafer. By using a finite element method with a boundary condition taking account of a strained GaN buffer layer which was neglected in previous simulation works, the strain distribution in the QWs of these pillars was simulated as a function of pillar diameter. The blue-shift in the QWs emission wavelength was then calculated from the strain-dependent changes in piezoelectric field, and the consequent modification of transition energy in the QWs. The simulation and experimental results agree well, confirming the necessity for considering the strained buffer layer in the strain simulation. These results provide not only significant insights into the mechanism of strain relaxation in these micro-pillars but also practical guidance for design of micro/nano LEDs. (C) 2012 American Institute of Physics. [http://dx.doi.org/10.1063/1.4733335]
What problem does this paper attempt to address?