Abstract:The authors present an in situ study of the effect of nitrogen plasma pulse time on the temporal evolution of the surface morphology of InN growth on a-plane sapphire at 250 °C by plasma assisted atomic layer epitaxy (ALEp). The growth surface evolution was monitored in real-time using grazing incidence small angle x-ray scattering (GISAXS) measurements at an x-ray incidence angle of 0.8°. Nitrogen plasma pulse time (tp) was varied between 15 and 30 s in 5-s steps, and for all tp, the near specular scattering broadens and correlated peaks develop and evolve along the Yoneda Wing (YW). For tp ≥ 20 s, a YW with one correlated length scale evolves. At the end of the growth, the longest correlated length scale is 16.54 nm for tp = 25 s. Porod analysis of GISAXS intensity at high qy for tp = 25 s shows the formation of mounded shapes at the early stage of nucleation that transitioned to cylinders after about 3 unit cells of InN growth. Additionally, at tp = 25 s, the growth rate is highest with root mean square surface roughness and carbon impurity levels at or below atomic force microscopy and x-ray photoelectron spectroscopy sensitivity limits, respectively. At tp < 25 s, the growth surface may be undersaturated and at tp > 30 s, it appears that trimethylindium precursor molecules start to decompose, resulting in higher carbon content in the film. Thus, the nature of GISAXS correlated length scale directly correlates with the material quality. Additional ex situ characterizations reveal an electron mobility of 6–31 cm2/V s for a 3–5 nm thick InN film on a-plane sapphire, which is similar to the reported value of 30 cm2/V s for a 1300 nm thick InN film grown by molecular beam epitaxy directly on sapphire. Thus, the combination of in situ synchrotron x-ray analysis and ex situ characterization is a powerful approach to develop understanding of the growth mechanisms of ALEp of III-N materials in order to improve the quality by reducing impurities and broaden material applications.

Kinetic Behavior of Nitrogen Penetration into Indium Double Layer Improving the Smoothness of InN Film

Sputtering Growth of Preferential C-Axis-oriented Aluminum Nitride Film Using Homogeneous Buffer Layer

Enhancing indium bilayer nitridation through novel hydrogen insertion process in InN epitaxy: A kinetic mechanism

The Influence of Indium Surfactant on the Electrical Properties of GaN Epilayers Grown by Metal-Organic Chemical Vapour Deposition

Theoretical study of InN growth on Mn-stabilized zirconia (111) substrates

Unintentionally Doped InN Grown Onto an Atomically Flat AlN Intermediate Layer Using Plasma‐assisted Molecular Beam Epitaxy

Electronic Structure and Trilayer Growth of Indium Films on Si(111): a Photoemission Study

Study on the Preparation of InN Films under Different Substrates and Nitrogen-Argon Flow Ratios and the Effect of Operating Temperature on Carrier Transport in P-Nio/n-inn Heterojunctions

Influence of GaN Buffer Layer for InN Growth

Theoretical Study of the Initial Stage of Inn Growth on Cubic Zirconia (111) Substrates

Initial Stages of the Cubic-Inn Growth with the Technique of the Pre-Deposition of Indium

Synthesis and Growth of InN with Pre-deposited Indium Nanodots Method on MOCVD at Low Temperature

Growth of Thick InN by Molecular Beam Epitaxy

Improvement on Epitaxial Grown of InN by Migration Enhanced Epitaxy

Understanding the effect of nitrogen plasma exposure on plasma assisted atomic layer epitaxy of InN monitored by real time grazing incidence small angle x-ray scattering

The High Mobility Inn Film Grown by Mocvd with Gan Buffer Layer

First stages of the InP(1 0 0) surfaces nitridation studied by AES, EELS and EPES

Study of InN/GaN interfaces using molecular dynamics

Graphene‐Nanorod Enhanced Quasi‐Van Der Waals Epitaxy for High Indium Composition Nitride Films

Study of Interface Properties of InN and InN-Based Heterostructures by Molecular Beam Epitaxy

Recent Progress in Metal-Organic Chemical Vapor Deposition of (000(1)Over-Bar) N-Polar Group-Iii Nitrides