Abstract:As a non-volatile semiconductor memory technology, phase-change memory has a wide range of application prospects as a result of the excellent comprehensive performance. In this paper, multilayer thin films based on Sb2Te3 material were designed and prepared by inserting the Sn15Sb85 layer. The thermal and electrical properties of superlattice-like Sb2Te3/Sn15Sb85 phase-change films can be adjusted by controlling the thickness ratio of Sb2Te3/Sn15Sb85. In comparison to the monolayer Sb2Te3 film, the multilayer layer Sb2Te3/Sn15Sb85 materials have a higher crystallization temperature, larger crystallization activation energy, and longer data lifetime, indicating the great improvement of thermal stability. The changes in the phase structure and vibrational modes of multilayer Sb2Te3/Sn15Sb85 films were characterized by X-ray diffraction and Raman spectroscopy, respectively. The presence of Sn15Sb85 layers restrains grain growth and refines the grain size. The multilayer Sb2Te3/Sn15Sb85 films exhibit better surface flatness, smaller surface potential undulation, and lower thickness variations than single-layer Sb2Te3. Phase-change memory cells based on the [Sb2Te3 (1 nm)/Sn15Sb85 (9 nm)]5 thin film has a lower threshold voltage (1.9 V) and threshold current (3.1 μA) compared to the Ge2Sb2Te5 film. Meanwhile, the electrical heating model of a phase-change memory cell based on a [Sb2Te3 (1 nm)/Sn15Sb85 (9 nm)]5 multilayer structure was established by multiphysics coupling analysis, proving the great improvement in heat transfer performance and efficiency. The experimental and theoretical studies confirm that the insertion of the Sn15Sb85 layer can significantly improve the crystallization properties of Sb2Te3 films, paving the way for optimizing the phase-change materials by regulating the microstructural parameters.

Ti10Sb60Te30 for Phase Change Memory with High-Temperature Data Retention and Rapid Crystallization Speed

Sb 7 Te 3 /znsb Multilayer Thin Films for High Thermal Stability and Long Data Retention Phase-Change Memory

Ta-doped Ge5Sb95 Phase Change Thin Films for High Speed and Low Power Application

Ga2te3 Phase Change Material For Low-Power Phase Change Memory Application

Phase-change Behaviors of Sb80Te20/SbSe Nanocomposite Multilayer Films

Sb7te3/Ge Multilayer Films for Low Power and High Speed Phase-Change Memory

Phase-Change Material Ge0.61sb2te For Application In High-Speed Phase Change Random Access Memory

Ultrafast Phase Change Speed and High Thermal Stability of Antimony and Zinc Co-Sputtering Thin Film for Phase Change Random Access Memory Application

Sb-rich Zn–Sb–Te Phase-Change Materials: A Candidate for the Trade-off Between Crystallization Speed and Data Retention

Research on Improved Crystallization Properties and Underlying Mechanism of the Sb2Te3 Phase-Change Thin Film by Inserting Sn15Sb85 Layers.

Te-Free SiSb Phase Change Material for High Data Retention Phase Change Memory Application

Al1.3sb3te Material For Phase Change Memory Application

Materials For Phase-Change Memory With Elevated Temperature Stability

Characterization of Cr-doped Sb2 Te3 Films and Their Application to Phase-Change Memory

Study on GeGaSbTe Film for Long Data Retention Phase Change Memory Application

Gete/Crsb2te Superlattice-Like Thin Film for Excellent Thermal Stability and High Phase Change Speed

Improved Thermal Stability and Electrical Properties for Al-Sb-Te Based Phase-Change Memory

Thermal Properties And Structure Of Tega2sb7 Thin Films For Phase-Change Memory

W-Sb-Te Phase-Change Material: A Candidate For The Trade-Off Between Programming Speed And Data Retention

Crystallization Process of Amorphous GaSb$_{5}$Te$_{4}$ Film for High-Speed Phase Change Memory

Investigation on Sb-rich Sb-Se-Te phase-change material for phase change memory application