Abstract:The serrated grain boundaries obtained by solution treatment followed by slow-cooling can improve the creep properties of nickel-based superalloy, but such heat treatment simultaneously gives rise to coarse γ' precipitates and deteriorates the high-temperature strength. Herein, the interrupted cooling during solution treatment was used to obtain the serrated grain boundaries and the fine γ' precipitates in a nickel-based powder superalloy by regulating the intermediate temperature. The effects of intermediate temperature on the grain morphology and secondary γ' precipitate size distribution in the alloy were systematically investigated. Flat grain boundaries were formed in the sample at the intermediate temperature of 1140 °C. The serrated grain boundaries appeared in the samples with an intermediate temperature below 1120 °C. The amplitude of the serrated grain boundaries increased from 0.62 to 1.03 μm as the intermediate temperature reduced from 1120° to 1000°C. With the decrease of the intermediate temperature, the secondary γ' precipitates in the alloys changed from spherical to butterfly shapes, and then split. The size of secondary γ' increased from 312 to 456 nm for the alloys with the intermediate temperature between 1120 and 1000 °C. Meanwhile, the tertiary γ' precipitates were produced under the intermediate temperature of 1120–1050 °C, forming a multimodal size distribution of γ' precipitates in the superalloys. The microhardness values of the samples were improved with the increasing intermediate temperature during the interrupted cooling, which was closely related to the size of γ'. As the intermediate temperature rose from 1050 °C to 1120 °C, the tensile strength of the samples increased from 1297 MPa to 1425 MPa at room temperature and from 985 MPa to 1100 MPa at 650 °C.

Effect of Melt Superheating Time on Solidification Microstructure of Superalloy K4169

Effects of Heat Treatment on the Microstructure and Properties of a Cast Nickel-Based High-Cr Superalloy

Solidification behavior and segregation characteristics of high W-content cast Ni-Based superalloy K416B

Effect of Cooling Rate on the Microstructure and Mechanical Property of Nickel-Based Superalloy MAR-M247

Effects of Foundry Variables and Refiners on Cast Structures of Superalloy K4169ii. Dendrite Structures and Granulation Mechanisms

The Effects of Microstructure on the Thermophysical Properties of the K439B Ni-Based Superalloy

Effect of Overheating Treatment on Microstructure and Stress Rupture Properties of a Nickel-Based Single-Crystal Superalloy

Influence of Various Heat Treatments on Microstructures and Mechanical Properties of GH4099 Superalloy Produced by Laser Powder Bed Fusion

Photoemission Studies of High-Tc Superconductors: The Superconducting Gap

Influence of Heat Treatment on Microstructure and Stress Rupture Property of Nickel-base Superalloy

Effects of heat-treatment temperature on microstructure and electrochemical properties of AB5 type MlNi 3.60Co 0.85Mn 0.40Al 0.15 hydride electrode alloy

Effect of Nb Content on Microstructure and Mechanical Properties of K4169-Type Superalloy

Effect of magnetic‐thermal coordinated control solidification on grains and porosities of a superalloy K4169Einfluss magnetisch‐thermisch koordinierter, kontrollierter Erstarrung auf Körner und Porositäten einer Superlegierung K4169

Effect of Heat Treatment on the Microstructure and Fracture Behaviors of a Ni–Cr–Fe Superalloy

Microstructure And Mechanical Properties Of Laser Melting Deposited Gh4169 Superalloy

Influence of Forging and Heat Treatment on the Microstructure and Mechanical Properties of a Heavily Alloyed Ingot-Metallurgy Nickel-Based Superalloy

The Effect of the Cooling Rates on the Microstructure and High-Temperature Mechanical Properties of a Nickel-Based Single Crystal Superalloy

Effects of intermediate temperature on the grain boundary and γ' precipitates of nickel-based powder superalloy under interrupted cooling

Effects of Foundry Variables and Refiners on Cast Structures of Superalloy K4169i. Grain Structures and Grain Refinement Mechanisms

Study on the stability of different refractories during the melting process of a K4169 Ni-based superalloy

Exceptional cryogenic tensile properties of K4169 superalloy by micro-grain casting process