Abstract:Porosity is a major casting defect in alloys with large solidification intervals due to the disordered microstructure and broad mushy zones,which decreases badly the mechanical performance.Hence,finding ways to effectively reduce the porosity,further to optimize microstructure and mechanical per-formance is of great significance.In this regard,the Al-Cu-based alloys with large solidification intervals are continuously processed by coupling the travelling magnetic fields (TMF) with sequential solidifica-tion.Additionally,experiments combined with simulations are utilized to comprehensively analyze the mechanism of TMF on the reduction in porosity,including shrinkage porosity and gas porosity,from dif-ferent perspectives.Current findings determine that downward TMF can effectually optimize together the porosity,microstructure and performance,by inducing the strong long-range directional melt flows,stabilizing the mushy zones,and optimizing the feeding channels and exhaust paths,as well as increas-ing the driving force of degassing process.Eventually,downward TMF can increase the ultimate tensile strength,yield strength,elongation and hardness from 175.2 MPa,87.5 MPa,13.3 ％ and 80.2 kg mm-2 without TMF to 218.6 MPa,109.3 MPa,15.6 ％ and 95.5 kg mm-2,while reduce the total porosity from 0.95 ％ to 0.18 ％.However,Up-TMF exerts negative effects on the optimization of porosity,microstruc-ture and performance due to the opposite strong directional magnetic force and melt flows.Overall,our study provides an effective way to optimize together the porosity,microstructure and mechanical performance,and reveals their relationship,as well as details the relevant mechanisms of TMF on the porosity reduction from different perspectives.

Effect of magnetic‐thermal coordinated control solidification on grains and porosities of a superalloy K4169Einfluss magnetisch‐thermisch koordinierter, kontrollierter Erstarrung auf Körner und Porositäten einer Superlegierung K4169

Exceptional cryogenic tensile properties of K4169 superalloy by micro-grain casting process

Gradient Microstructure of K 4169 Superalloy Prepared by Low Voltage Pulsed Magnetic Field Combined with Directional Solidification

Effect of Electromagnetic Stirring on Fine Grain Formation and Tensile Property Improvement for Fe-Ni Superalloy

Microstructure And Solidification Characteristics And Segregation Behavior Of Superalloy K4169

Effects of electromagnetic field and surface nucleating agent on the grain refinement of superalloy K417

Effects of Foundry Variables and Refiners on Cast Structures of Superalloy K4169i. Grain Structures and Grain Refinement Mechanisms

Microstructure and Mechanical Properties of Ni-based Superalloy K418 Produced by the Continuous Unidirectional Solidification Process

Effect of centrifugal casting process on mold filling and grain structure of K418B turbine guide

Eliminating shrinkage defects and improving mechanical performance of large thin-walled ZL205A alloy castings by coupling travelling magnetic fields with sequential solidification

Effect of Solid-Solution Treatment on Microstructure and Performance of GH4169 Superalloy

Simulation of Fine Grain Casting Process of Superalloy K4202 by Thermal Control Method

Process Parameter Effects on Solidification Behavior of the Superalloy During Investment Casting

Laser powder bed fusion of GH4099 Ni-based superalloy under a static magnetic field with tailored microstructure and enhanced mechanical performance

Electromagnetic Soft-Contact Confinement and Directional Solidification of Near-Net Shape Blade Castings of Superalloys

Solidification behavior and segregation characteristics of high W-content cast Ni-Based superalloy K416B

Effect of fine-grained structure on the mechanical properties of superalloys K3 and K4169

Effect of Cooling Rate on Microstructure, Microsegregation and Mechanical Properties of Cast Ni-based Superalloy K417G

In-situ Observation of Solidification Process of GH4169 Superalloy at Different Cooling Rates

Research Status of the Effects of Alloying Elements on Microstructural Stability of K4169 Superalloy

Reducing Porosity and Optimizing Performance for Al-Cu-based Alloys with Large Solidification Intervals by Coupling Travelling Magnetic Fields with Sequential Solidification