Abstract:Due to the varying cooling conditions within different internal areas, there is a notable disparity in the cooling rates. This discrepancy has resulted in severe elemental segregation and the formation of coarse M C phases in the Φ508 mm GH4151 superalloy ingot, which has undergone triple smelting (VIM + ESR + VAR). These factors have had detrimental effects on the stability of the alloy structure. The solidification segregation, microstructure evolution, and secondary phase precipitation behaviors of GH4151 alloy under a wide cooling rate range were studied through Differential Scanning Calorimetry (DSC), in situ observations with High-Temperature Confocal Laser Scanning Microscopy (HT-CLSM), Directional Solidification (DS), and Computational Fluid Dynamics (CFD). The results show that the solidification path of GH4151 can be summarized as (1)L → γ (1334.6 °C); (2) L → γ + M C (1281 °C and 1258 °C); (3)L → γ + M C + γ/γ' + Laves (1152 °C); (4)L → γ + M C + γ/γ' + Laves+ M 2 B (1084 °C), where MC, γ/γ', Laves, and M 2 B are the main precipitate types during the solidification process. Mo, Nb, and Ti are the main dendritic segregation elements. Due to the reverse diffusion of solute elements under low cooling rates, the element segregation presents an increasing and then decreasing trend with the increase in cooling rate. The maximum segregation rate occurs at 24 °C/min. The cooling rate dramatically influences the morphology of the solid-liquid interface. The prediction formulas for PDAS and SDAS of GH4151 alloy under slow cooling conditions are λ 1 = 1137.1· V -0.25 · G -0.5 and λ 2 = 153.6· V c -0.32 respectively. Similarly, with the increase of solidification speed, the size of γ' phase, Laves phase, γ/γ' phase, and M C gradually decreases. When the cooling rate exceeds 12 °C/min, the large blocky M C phase evolves into elongated bars. The cooling rate from the center to the surface of the Φ508 mm VAR ingot ranges from 5 to 20 °C/min, with the standout being that the fastest cooling rate at the edge is about 48 °C/min.

Effects of Foundry Variables and Refiners on Cast Structures of Superalloy K4169ii. Dendrite Structures and Granulation Mechanisms

Effects of new refiners on the microstructures of cast superalloy K419

Effects of Foundry Variables and Refiners on Cast Structures of Superalloy K4169i. Grain Structures and Grain Refinement Mechanisms

Effects of New Refiners on Grain Structures of Cast Superalloy K4169

Study on the stability of different refractories during the melting process of a K4169 Ni-based superalloy

Quantifying the effects of grain refiners (AlTiB and Y) on microstructure and properties in W319 alloys

Effect of carbon addition on microstructure and mechanical properties of a typical hard-to-deform Ni-base superalloy

Effect of the Cooling Rate on the Microstructure of Directionally Solidified Casting (CMSX-4 Ni Superalloy)

Effect of Carbon on the Microstructure Evolution and Mechanical Properties of Low Si-Containing Centrifugal Casting 20cr32ni1nb Alloy

Microstructure and Microsegregation in A Ni-Based Single Crystal Superalloy Directionally Solidified under High Thermal Gradient

Solidification behavior and segregation characteristics of high W-content cast Ni-Based superalloy K416B

Effect of yttrium addition on microstructural evolution and high temperature mechanical properties of Ni-based superalloy produced by selective laser melting

Effect of carbon on the solidification microstructure of single crystal Ni-based superalloy AM3

Dendrite evolution and quantitative characterization of γ′ precipitates in a powder metallurgy Ni-based superalloy by different cooling rates

The Effects of Microstructure on the Thermophysical Properties of the K439B Ni-Based Superalloy

Numerical Simulation of Temperature Field and Grain Texture During Casting Single Crystal Superalloy DD403 with Liquid Metal Cooling

Effect of the cooling rates on the microstructure and segregation characteristics in directionally solidified GH4151 superalloy

Effects of Cobalt on Solidification Characteristics and As-Cast Microstructure of an Advanced Nickel-Based Single Crystal Superalloys

Microalloying effects of Y on performance of cast nickel-based superalloy IN713C

Exceptional cryogenic tensile properties of K4169 superalloy by micro-grain casting process

Effect of Cooling Rates on the Microstructure and Mechanical Property of La Modified Al7SiMg Alloys Processed by Gravity Die Casting and Semi-Solid Die Casting