Effect of initial mixed grain microstructure state of deformed Ni-based superalloy on its refinement behavior during two-stage annealing treatment
Guan-Qiang Wang,Hong-Bin Li,Ming-Song Chen,Y.C. Lin,Wei-Dong Zeng,Yan-Yong Ma,Quan Chen,Yu-Qiang Jiang
DOI: https://doi.org/10.1016/j.matchar.2021.111130
IF: 4.537
2021-06-01
Materials Characterization
Abstract:<p>The effect of initial mixed grain microstructure state of deformed Ni-based superalloy on its refinement behavior during two-stage annealing treatment was investigated. Firstly, the deformed specimens with different initial mixed grain microstructure states were obtained by different hot compression experiments. Then, two-stage heat treatment experiments including aging treatments (AT) for precipitating δ phase and subsequent recrystallization annealing treatments (RT) to refine mixed grains were carried out. The results show that the deformation energy and dynamic recrystallization (DRX) degree are the main initial microstructure factors that affect the refinement behavior of deformed mixed grains. The deformation energy was estimated by the area under the stress-strain curve (<em>S</em>) due to the proportional relationship between them. When <em>S</em> is high, the recrystallization rate during the RT is high, and the final annealed grain is uniform and fine. When <em>S</em> is medium, the recrystallization rate is determined by DRX degree. The recrystallization rate is low and the final annealed grain is nonuniform when DRX degree is high. However, when DRX degree is low, the recrystallization rate is quick and final annealed grains are coarse but uniform. Besides, it is found that besides deformation energy, the competition relationship between static recrystallization (SRX) nucleation and breakage of δ phase affects the dissolution of δ phase during the RT. When the SRX nuclei form at δ phase boundary, the corresponding δ phase is protected.</p>
materials science, multidisciplinary,metallurgy & metallurgical engineering, characterization & testing