Abstract:The slow-cooling treatment has been observed to induce the formation of serrated grain boundaries, which effectively enhance the creep strength of nickel-based powder superalloys. However, this heat treatment also leads to the coarsening of γ′ precipitates in nickel-based alloys, which impairs their dispersion-strengthening effects. To address this issue, the high-temperature pre-precipitation treatment (HTPT) was employed to simultaneously form fine γ′ precipitates and serrated grain boundaries in the alloys. A systematic investigation was conducted to analyze the impact of various HTPT intermediate temperatures (ranging from 1150 to 1110 °C) on the microstructure and mechanical properties of the superalloy. In this study, a significant increase in the volume fraction of secondary γ′ with a butterfly-shaped morphology, from 1.6% to 27.7%, was observed as the intermediate temperature was decreased from 1150 to 1110 °C. Simultaneously, the average size of spherical tertiary γ′ precipitates decreased from 73.3 nm to 52.7 nm. Serrated grain boundaries were observed in the samples when the HTPT temperature was below 1140 °C, with increasing amplitudes ranging from 2.1 to 2.8 μm. To investigate the formation mechanism of these serrated grain boundaries, we focused on the interactions between γ′ precipitates and grain boundaries. At temperatures below 1135 °C, a fan-shaped structure consisting of finger-shaped γ′ dendrites and γ phases was observed, which potentially contributes to the formation of serrated grain boundaries. Among the samples tested, the sample subjected to an HTPT temperature of 1130 °C showed the best mechanical properties at room temperature (1542 MPa, 12.9% elongation), while the 1140 °C sample exhibited superior performance at 750 °C (1301 MPa, 6.5% elongation). These findings highlight the potential of heat treatment as a novel approach for enhancing the mechanical characteristics of nickel-based superalloys.

Effect of Heat Treatment Process on Microstructure of Cast Superalloy K480

Influence of Heat Treatment on Microstructure and Stress Rupture Property of Nickel-base Superalloy

Effect of Heat Treatment on the Microstructure and Properties of Alloy K403

Effects of Heat Treatment on the Microstructure and Properties of a Cast Nickel-Based High-Cr Superalloy

Microstructure evolution of a nickel‐based powder metallurgy superalloy under different solution treatment temperatures

Effect of elements distribution on oxidation behavior of a nickel-based single crystal superalloy

The Effects of Microstructure on the Thermophysical Properties of the K439B Ni-Based Superalloy

Effect of Heat Treatment on the Microstructure and Fracture Behaviors of a Ni–Cr–Fe Superalloy

Effect of Heat Treatment on the Microstructure of Multiphase Nial-Based Alloy

Effects of heat-treatment temperature on microstructure and electrochemical properties of AB5 type MlNi 3.60Co 0.85Mn 0.40Al 0.15 hydride electrode alloy

Effect of heat treatment on microstructure and mechanical properties of Cu–6.9Ni–2.97Al–0.99Fe–1.06Mn alloy

Microstructural evolution of GH4079 superalloy during hot deformation and heat treatment

Influence of Various Heat Treatments on Microstructures and Mechanical Properties of GH4099 Superalloy Produced by Laser Powder Bed Fusion

Effect of Heat Treatment on the Microstructure of a Ni–Fe Based Superalloy for Advanced Ultra-Supercritical Power Plant Applications

Effects of pre-precipitation treatment temperature on the microstructure and mechanical properties of nickel-based powder superalloy

Effect of Heat Treatment Temperature on Microstructure, Tensile Properties and δ-Precipitate Phase in Ni-based Superalloy

Effect of Heat Treatment on Microstructure and Mechanical Properties of a Selective Laser Melting Processed Ni-Based Superalloy GTD222

Effects of intermediate temperature on the grain boundary and γ' precipitates of nickel-based powder superalloy under interrupted cooling

Effect of Overheating Treatment on Microstructure and Stress Rupture Properties of a Nickel-Based Single-Crystal Superalloy

Growth and dissolution behavior and morphology evolution of γ' precipitates in GH4742 nickel-based superalloy

The Effects of Grain Size and Twins Density on High Temperature Oxidation Behavior of Nickel-Based Superalloy GH738