Abstract:SiC/SiC composites, prepared by reactive melt infiltration (RMI), exhibit exceptional properties. However, the presence of residual Si in the composite matrix can significantly compromise their high-temperature mechanical properties. Addressing the issue of high-content residual Si aggregation remains a crucial focus of research in order to fully unlock the application potential of SiC/SiC composites prepared by RMI. In this work, a special porous carbon (C g ) is successfully synthesized and introduced into the porous 2D SiC/SiC composites prepared by CVI. The unique pore structure of the SiC/SiC-C g is thoroughly analyzed, along with its liquid Si infiltration process. The difference in coefficient of thermal expansion (CTE) between SiC and C g can cause thermal stress, which can destory the C g structure. Consequently, the C particles detach from the C g skeleton and react with liquid Si to create SiC. This process effectively separates residual Si and helps alleviate the negative effects of residual Si aggregation. The microstructure and phase distribution of SiC/SiC composites obtained by liquid Si infiltrating different C structures are investigated and compared, and it demonstrates the positive effect of C g on the uniform phase distribution of matrix in the composites. The as-received SiC/SiC composites possess a density of 2.94 g/cm 3 with open porosity of 1.23%, and a flexural strength of 808.7±10.2MPa, a fracture toughness of 25.5±1.8MPa·m 1/2 , a tensile strength of 317.4±12.4MPa and a proportional ultimate stress of 157.33±4.1MPa. Acoustic emission (AE) and digital image correlation (DIC) technology are used to study the special mechanical behavior of composites.

Preparation and Property of Immersion Heater with SiC Composite Ceramic Sheath

Fabrication and Properties of SiC/mullite Composite Porous Ceramics

Mechanical and Dielectric Properties of Porous Si3n4-Sio2 Composite Ceramics

Improvement of Strength and Oxidation Resistance for SiC/graphite Composites by SiC Coating

Fabrication and Properties of Reaction-Formed SiC by Infiltrating Molten Si into Mesocarbon Microbeads-Based Carbon Preform

Fabrication, Microstructure, and Properties of SiC/Al 4 SiC 4 Multiphase Ceramics Via an In-Situ Formed Liquid Phase Sintering

THE RESEARCH SITUATION OF THE THE HIGH-TEMPERATURE RESISTANCE OF Si3N4 BONDED SiC COMPOSITES

Fabrication of Layered SiC/C/Si/MeSi2/Me Ceramic–Metal Composites via Liquid Silicon Infiltration of Metal–Carbon Matrices

Preparation and properties of Ti3SiC2 preform reinforced SiC ceramic matrix composites

The Thermal, Electrical and Mechanical Properties of Porous Α-Sic Ceramics Bonded with Ti3SiC2 and Β-Sic Via Low Temperature In-Situ Reaction Sintering

EFFECT OF HEAT TREATMENT ON THE MICROSTRUCTURE AND PHYSICAL PROPERTIES OF SiC/Si LAMINATED COMPOSITES

Thermal Conductivity and Microstructure Properties of Porous SiC Ceramic Derived from Silicon Carbide Powder

Microstructure and Thermal Conduction Property of SiCp/Al- Si Composite with High Reinforcement Content

Effect of Silicon Addition on Mechanical Properties of Mullite-Sic Composite Refractories

Fabrication, microstructure, and properties of SiC/Al4SiC4 multiphase ceramics via an in-situ formed liquid phase sintering

Fabrication of Si3N4 Ceramics with High Thermal Conductivity and Flexural Strength Via Novel Two-Step Gas-Pressure Sintering

Fluoride doped SiC/Si3N4 composite as a high thermal conductive material with enhanced mechanical properties

Construction of C/SiC–Cu3Si–Cu Interpenetrating Composites for Long-Duration Thermal Protection at 2500 °C by Cooperative Active-Passive Cooling

A novel porous carbon synthesized to serve in the preparation of highly dense and high-strength SiC/SiC by reactive melt infiltration

The dielectric adjustment in SiCf/mullite composites limited carbon content by in situ growth SiO2 layer

High-temperature Microwave Absorbing Properties of Ordered Mesoporous Inter-Filled SiC/SiO2 Composites