Abstract:The blends composed of polyamide 6 (PA6) and polyamide 66 (PA66) were obtained using two different preparation methods, one of which was the melt-mixing through a twin-screw extruder and the subsequent injection molding; and the other, the in situ blending through anionic polymerization of epsilon-caprolactam in the presence of PA66. For the former, there existed a remarkable improvement in toughness but a drastic drop in strength and modulus; however, for the latter, a reverse but less significant trend of mechanical properties change appeared. Various characterizations were conducted, including the analyses of crystalline morphology, crystallographic for-in, and crystallization and melting behaviors using polarized optical microscopy (POM), wide-angle X-ray diffraction (WAXD), and differential scanning calorimetry (DSC), respectively; observation of morphology of fractured surface with scanning electron microscope (SEM); measurement of glass transition through dynamic mechanical analysis (DMA); and the intermolecular interaction as well as the interchange reaction between the two components by Fourier transform infrared spectrometry (FT-IR) and C-13 solution NMR. The presence and absence of interchange reaction was verified for the in situ and melt-mixed blends, respectively. It is believed that the transreaction resulted in a drop in glass transition temperature (T,) for the in situ blends, contrary to an increase of T, with increasing PA66 content for the melt-mixed ones. And the two kinds of fabrication methods led to significant differences in the crystallographic form, spherulite size and crystalline content and perfection as well. Accordingly, it is attempted to explain the reasons for the opposite trends of changes in the mechanical properties for these two blends. (c) 2007 Wiley Periodicals, Inc.

Mechanical properties, rheology, and crystallization of epoxy-resin-compatibilized polyamide 6/polycarbonate blends: Effect of mixing sequences

Rheological Properties of PET/PA66/Liquid Crystalline Copolyesteramide Blends

Effect of blending sequence on the morphology and properties of polyamide 6/EPDM-g-MA/epoxy blends

Effect Of Polyethersulfone On The Mechanical And Rheological Properties Of Polyetherimide-Modified Epoxy Systems

Effects of Epoxy Resin on Properties of Polyamide 6/EPDM-g-MAH Blends

Morphology, rheology, and mechanical properties of polylactide/ poly(ethylene-co-octene) blends

Microstructures and Mechanical Properties of Polypropylene/polyamide 6/Polyethelene-Octene Elastomer Blends

Relationship between structure and properties in high-performance PA6/SEBS-g-MA/(PPO/PS) blends: The role of PPO and PS

Influence of Preparation Methods on the Structures and Properties for the Blends Between Polyamide 6co6t and Polyamide 6: Melt‐mixing and In‐situ Blending

Effect of core-shell morphology evolution on the rheology, crystallization, and mechanical properties of PA6/EPDM-g-MA/HDPE ternary blend

Rheological Properties, Morphology, and Thermal Performance of E‐MA‐GMA/PC Blend

Structure, Properties, and Mechanism of Reactive Compatibilization of Epoxy to Polyphenylene Sulfide/Polyamide Elastomer

Influences of component ratio of minor phases and charge sequence on the morphology and mechanical properties of PP/PS/PA6 ternary blends

Response Surface Analysis of PS/EPDM/PA6 Ternary Blends: Effect of Mixing Sequence, Composition, and Viscosity Ratio on the Mechanical Properties

STUDY ON PHASE STRUCTURE AND MECHANICAL PROPERTIES OF PBT AND PA6 BLENDS

Rheology and morphology of compatibilized polyamide 6 blends containing liquid crystalline copolyesters

The influence of mixing order on the phase inversion and crystallization behavior of polyamide 6/maleic anhydride-g-ethylene–propylene–diene rubber/high-density polyethylene blend

Influence of Preparation Methods on Structure and Properties of PA6/PA66 Blends: A Comparison of Melt‐mixing and in Situ Blending

Study on structure and properties of polyamide 6/polypropylene blends

The Effect of Blending Sequence on Phase Morphology of Nylon 6/abs/sma Blends

Effect of blending sequence on the morphologies of poly(butylene terephthalate)/epoxy/clay nanocomposites by a rheological approach