Abstract:An optical fiber sensor for the simultaneous measurement of microdisplacement and temperature based on balloon-shaped single-mode fibers cascaded with a fiber Bragg grating with two core-offset joints is proposed. The interference between the core mode and cladding mode is caused by the stimulation of the cladding mode by the core-offset joints’ structure. The cladding of the core has a distinct refractive index, which causes optical path differences and interference. The balloon-shaped structure realizes mode selection by bending. As the displacement increases, the radius of the balloon-shaped interferometer changes, resulting in a change in the interference fringes of the interferometer, while the Bragg wavelength of the fiber grating remains unchanged. Temperature changes will cause the interference fringes of the interferometer and the Bragg wavelength of the fiber grating to shift. The proposed optical fiber sensor allows for the simultaneous measurement of microdisplacement and temperature. The results of the experiment indicate that the sensitivity of the interferometer to microdisplacement is 0.306 nm/μm in the sensing range of 0 to 200 μm and that the temperature sensitivity is 0.165 nm/°C, respectively. The proposed curvature sensor has the advantages of a compact structure, extensive spectrum of dynamic measurement, high sensitivity, and simple preparation, and has a wide range of potential applications in the fields of structural safety monitoring, aviation industry, and resource exploration.

Simultaneous measurement of temperature and infinitesimal displacement using the high cladding mode coupling loss in fiber Bragg grating

Simultaneous Measurement of Displacement and Temperature Based on Two Cascaded Balloon-Like Bent Fibre Structures

Simultaneous Measurement of Displacement and Temperature Based on a Balloon-Shaped Bent SMF Structure Incorporating an LPG

Simultaneous Strain and Temperature Measurements with Fiber Bragg Grating Written in Novel Hi-Bi Optical Fiber

Simultaneous Measurement of Temperature and Strain Based on Compact Parallel Core–Cladding FBGs Inscribed by Femtosecond Laser Point-by-Point Method

Simultaneous Measurement of Pressure and Temperature Using a Single Fiber Bragg Grating

Cladding-Mode Backward-Recoupling-Based Displacement Sensor Incorporating Fiber Up Taper and Bragg Grating

Research On Measurement Of Fiber Bragg Grating Considering The Cross-Sensitivity Of Temperature And Strain

Cladding-Mode-Recoupling-Based Tilted Fiber Bragg Grating Sensor With a Core-Diameter-Mismatched Fiber Section

Simultaneous Measurement of Microdisplacement and Temperature Based on Balloon-Shaped Structure

High-Resolution Strain/Temperature Sensing System Based on A High-Finesse Fiber Cavity and Time-Domain Wavelength Demodulation

Temperature insensitive fiber optical displacement sensors based on double fiber Bragg gratings

Non-uniform-tilt-modulated fiber Bragg grating for temperature-immune micro-displacement measurement

Method for temperature measurement of taper long-period fiber Bragg grating

Simultaneous Measurement of Displacement and Temperature Using In-Fibre-bragg-grating-based Extrinsic Fizeau Sensor

Fiber Bragg grating sensing system for temperature measurements based on optically injected DFB-LD with an OEO loop

High-Spatial-Resolution High-Temperature Sensor Based on Ultra-Short Fiber Bragg Gratings With Dual-Wavelength Differential Detection

Simultaneous Temperature and Strain Measurement with Enhanced Resolution Up to 20 Times by Using a Compact Hybrid Optical Waveguide Bragg Grating

Fiber Bragg Grating with Enhanced Cladding Modes Inscribed by Femtosecond Laser and a Phase Mask

High-Resolution Simultaneous Measurement of Strain and Temperature Using $\Pi$-Phase-shifted FBG in Polarization Maintaining Fiber

A Temperature and Strain Sensor Based on a Cascade of Double Fiber Bragg Grating