Abstract:Optical fibre Bragg grating (FBG) sensors have significant potential for use as embedded devices to monitor the structural integrity of engineering materials. The main drawback of the FBG strain sensor is its cross-sensitivity to temperature. This paper reports a simple scheme for multiplexing a FBG and an extrinsic Fabry-Perot interferometric (EFPI) sensor to enable the decoupling of strain from temperature. The EFPI sensor was constructed using a precision bore quartz capillary tube which housed two cleaved optical fibres. The gap between the fibre end-faces served as the Fabry-Perot cavity. Since the coefficients of thermal expansion between the optical fibre and the capillary tube were similar, the EFPI sensor has a very low sensitivity towards temperature. Therefore, when both sensors are placed close together, the EFPI sensor can act as the strain sensor, and temperature can be determined from the FBG wavelength shift after taking out the strain effect. The signal processing for the EFPI sensor was based on a channelled spectrum method using a CCD spectrometer. The same CCD spectrometer was also used to determine the wavelength shift of the FBG. The cross-talk between the EFPI and FBG sensors was evaluated. The feasibility of conducting simultaneous strain and temperature measurements was demonstrated.

Simultaneous Temperature and Strain Measurement with Enhanced Resolution Up to 20 Times by Using a Compact Hybrid Optical Waveguide Bragg Grating

Simultaneous measurement of temperature and strain using double-cladding fiber based hybrid Bragg grating

Simultaneous measurement of strain and temperature based on a fiber Bragg grating combined with a high-birefringence fiber loop mirror

Simultaneous Measurement of Pressure and Temperature Using a Single Fiber Bragg Grating

Simultaneous Measurement of Strain and Temperature by Two Peanut Tapers with Embedded Fiber Bragg Grating.

Simultaneous Strain and Temperature Measurement Using Single High—duty—cycle Sampled Fiber Bragg Grating

Optical Fiber Sensor with Double Tubes for Accurate Strain and Temperature Measurement under High Temperature Up to 1000 °C

Ultrasensitive Parallel Double-Fpis Sensor Based on Vernier Effect and Type II Fiber Bragg Grating for Simultaneous Measurement of High Temperature and Strain

A Novel Temperature-Independent Double Fiber Bragg Grating Strain Sensor

Cascaded Fabry-Perot Interferometer-Regenerated Fiber Bragg Grating Structure for Temperature-Strain Measurement under Extreme Temperature Conditions.

Simultaneous Strain and Temperature Measurement Using a Combined Fibre Bragg Grating/extrinsic Fabry-Perot Sensor

Simultaneous Strain and Temperature Measurement with Fiber Bragg Grating and Multimode Fibers Using an Intensity-Based Interrogation Method

Simultaneous Strain and Temperature Measurement Using an Integrated Fibre Bragg Grating Extrinsic Fabry-Perot Sensor

Simultaneous Measurement for Strain and Temperature Using Fiber Bragg Gratings and Multimode Fibers

Compact Fiber Sensor With High Spatial Resolution for Simultaneous Strain and Temperature Measurement

Spatially-multiplexed fibre-optic Bragg grating strain and temperature sensor system based on interferometric wavelength-shift detection

Simultaneous Measurement of Strain and Temperature Using Pi-Phase-Shifted Fiber Bragg Grating on Polarization Maintaining Fiber

Simultaneous Measurement of Temperature and Strain Using a Phase-Shifted Fiber Bragg Grating Inscribed by Femtosecond Laser

Temperature-Strain Discrimination Sensor Using a WDM Chirped In-Fibre Bragg Grating and an Extrinsic Fabry-Pérot

Simultaneous Independent Temperature and Strain Measurement Using One Fiber Bragg Grating Based on the Etching Technique

Simultaneous Strain and Temperature Measurements in Composites Using A Multiplexed Fibre Bragg Grating Sensor and an Extrinsic Fabry-Perot Sensor