Abstract:It is an enormous challenge for optical fiber sensors to intuitively achieve the simultaneous measurement of both gas pressure and temperature with high sensitivity. To address this challenge, the Fabry–Perot interferometer (FPI) based on high-order harmonic Vernier effect is combined with the fiber Bragg grating (FBG). A novel fiber sensor built with a cascaded FPI and an FBG for the simultaneous measurement of gas pressure and temperature is designed and experimentally investigated by virtue of the temperature sensing property of FBG and its independence on gas pressure-induced refractive index change, where a high-order harmonic Vernier effect was utilized to boost the gas pressure sensitivity of the sensor. As gas pressure increases from 0 to 1 MPa, the internal envelope of composite FBG and FPI based 10-order harmonic Vernier effect exhibits redshift with maximal sensitivities of 146.64 nm/MPa and a high magnification factor of 43. FBG is insensitive to gas pressure change, whereas, the spectral response of the internal envelope 10-order harmonic Vernier effect and FBG monotonously move and undergo blueshift and redshift as the temperature increases from 30 °C to 120 °C with maximal sensitivities of −0.48 and 0.011 nm/°C, respectively. Therefore, the distinct sensitivities of FBG and FPI to gas pressure and temperature result in extraction of both gas pressure and temperature information simultaneously by constructing measurement matrixes.

Simultaneous Measurement of Pressure and Temperature Using a Single Fiber Bragg Grating

A Novel High-Sensitivity Fiber Grating Sensor for Simultaneous Measurement of Temperature and Pressure

Simultaneous Measurement of Displacement and Temperature Based on a Balloon-Shaped Bent SMF Structure Incorporating an LPG

Simultaneous Measurement of Displacement and Temperature Based on Two Cascaded Balloon-Like Bent Fibre Structures

Simultaneous pressure and temperature measurement using Hi-Bi fiber Bragg gratings

Air Gap Fiber Bragg Grating for Simultaneous Strain and Temperature Measurement

A diaphragm-type fiber Bragg grating pressure sensor with temperature compensation

Hollow Core Bragg Fiber Integrated With Regenerate Fiber Bragg Grating for Simultaneous High Temperature and gas Pressure Sensing

Pressure Sensor Based on a Free Elastic Cylinder and Birefringence Effect on an FBG with Temperature-Compensation

Composite Fabry–Perot interferometric gas pressure and temperature sensor utilizing four hole fiber with sensitivity boosted by high-order harmonic Vernier effect

Highly birefringent side-hole fiber Bragg grating for high-temperature pressure sensing

Studies on High-Sensitivity Hydrostatic Pressure Sensor Using Fiber Bragg Grating

An optical fiber sensor for the simultaneous measurement of pressure and position based on a pair of fiber Bragg gratings

High temperature and high pressure fiber microsphere Fabry–Perot sensor based on Vernier effect and FBG

Simultaneous Measurement of the Temperature and Force Using A Steel Cantilever Soldered with A Partially Nickel Coated In-Fibre Bragg Grating

Simultaneous Independent Temperature and Strain Measurement Using One Fiber Bragg Grating Based on the Etching Technique

Simultaneous Measurement of Temperature and Strain Based on Fiber Loop Mirror Combined with Fiber Bragg Grating

FBG Incorporated Side-open Fabry-Perot Cavity for Simultaneous Gas Pressure and Temperature Measurements

A High-Sensitive Fiber-Optic Fabry-Perot Sensor With Parallel Polymer-Air Cavities Based on Vernier Effect for Simultaneous Measurement of Pressure and Temperature

Temperature and Pressure Sensing System of Side Hole Fiber Grating Based on Scanning Laser.

A Fiber-Optic Pressure Sensor with Reflecting Optical Structure for the Simultaneous Measurement of Temperature