Abstract:An optical fiber sensor for the simultaneous measurement of microdisplacement and temperature based on balloon-shaped single-mode fibers cascaded with a fiber Bragg grating with two core-offset joints is proposed. The interference between the core mode and cladding mode is caused by the stimulation of the cladding mode by the core-offset joints’ structure. The cladding of the core has a distinct refractive index, which causes optical path differences and interference. The balloon-shaped structure realizes mode selection by bending. As the displacement increases, the radius of the balloon-shaped interferometer changes, resulting in a change in the interference fringes of the interferometer, while the Bragg wavelength of the fiber grating remains unchanged. Temperature changes will cause the interference fringes of the interferometer and the Bragg wavelength of the fiber grating to shift. The proposed optical fiber sensor allows for the simultaneous measurement of microdisplacement and temperature. The results of the experiment indicate that the sensitivity of the interferometer to microdisplacement is 0.306 nm/μm in the sensing range of 0 to 200 μm and that the temperature sensitivity is 0.165 nm/°C, respectively. The proposed curvature sensor has the advantages of a compact structure, extensive spectrum of dynamic measurement, high sensitivity, and simple preparation, and has a wide range of potential applications in the fields of structural safety monitoring, aviation industry, and resource exploration.

Non-uniform-tilt-modulated fiber Bragg grating for temperature-immune micro-displacement measurement

Simultaneous Measurement of Displacement and Temperature Based on a Balloon-Shaped Bent SMF Structure Incorporating an LPG

Simultaneous Measurement of Displacement and Temperature Based on Two Cascaded Balloon-Like Bent Fibre Structures

Temperature insensitive fiber optical displacement sensors based on double fiber Bragg gratings

Temperature-independent fiber bragg grating tilt sensor

Research On Measurement Of Fiber Bragg Grating Considering The Cross-Sensitivity Of Temperature And Strain

Tilted Bragg grating multipoint sensor based on wavelength-gated cladding-modes coupling

Cladding-Mode-Recoupling-Based Tilted Fiber Bragg Grating Sensor With a Core-Diameter-Mismatched Fiber Section

A Novel Fiberg Grating Sensing and Demodulating System with Temperature Compensation

Simultaneous Measurement of Microdisplacement and Temperature Based on Balloon-Shaped Structure

Cladding-Mode Backward-Recoupling-Based Displacement Sensor Incorporating Fiber Up Taper and Bragg Grating

Temperature-Insensitive Fibre-Optic Acceleration Sensor Based On Intensity-Referenced Fibre Bragg Gratings

Temperature-controlled Fiber Bragg Grating Dynamic Strain Detection System

Fiber Bragg grating sensing system for temperature measurements based on optically injected DFB-LD with an OEO loop

Temperature-Insensitive Fiber Bragg Grating Based Tilt Sensor with Large Dynamic Range

High-Resolution Strain/Temperature Sensing System Based on A High-Finesse Fiber Cavity and Time-Domain Wavelength Demodulation

Reflective Optical Fiber Sensors Based on Tilted Fiber Bragg Gratings Fabricated With Femtosecond Laser

Strain and Temperature Discrimination by Using Temperature-Independent FPI and FBG

Accurate compensation and prediction of the temperature cross-sensitivity of tilted FBG cladding mode resonances

Strain-insensitive temperature sensing with a dual polarization fiber grating laser

Simultaneous Independent Temperature and Strain Measurement Using One Fiber Bragg Grating Based on the Etching Technique