Abstract:In order to solve the problem that temperature sensor laying is complex and maintenance cost is high in the large-scale, multi-point real-time temperature monitoring process, the temperature monitoring system based on Fiber Bragg Grating was designed and developed. Using wavelength selectivity by optical fiber diffraction grating, a function of temperature and wavelength was established. Temperature of the measured position was inversed by calculating the wavelength variation through the optical fiber Bragg grating. Due to environmental, materials and other factors, the spectral distribution and temperature changes do not satisfy linear relationship. Therefore, designed the spectrum correction algorithm was designed, and function curve fitting of wavelength and temperature was completed with a degree of fitting greater than 99.7%. Experiments used FB136L-IAC-proof oven, LPT-200 diode, and 1 550 nm optical fiber to detect 20 to 280 degrees C temperature range of multi-point in real-time. The results show that when the temperature is changed by 1 degrees C, the corresponding center wavelength shifts about 0.04 nm to longer wavelengths. Compared with the test data from standard device, the error is less than +/- 0.3 degrees C. Meanwhile, the spectral correction algorithm was applied to the system to further improve the uniformity and accuracy of the temperature detection. Because the system uses fiber-optic sensor network, it has a strong anti-electromagnetic interference capability. The diffraction grating can achieve precise measurements, so it has big dynamic range and high accuracy. The innovation of the system is to ensure high-precision measurements, while still satisfy large-scale, multi-point, high anti-jamming capability of rapid laying, and has a strong practical value.

Method for temperature measurement of taper long-period fiber Bragg grating

Research On Measurement Of Fiber Bragg Grating Considering The Cross-Sensitivity Of Temperature And Strain

Simultaneous Measurement of Pressure and Temperature Using a Single Fiber Bragg Grating

Inexpensive optical fiber Fabry–Perot microcavity with controllable length for sensitive temperature measurements

Design and fabrication of long period fiber gratings in microfiber and the temperature sensing system

A Novel Fiberg Grating Sensing and Demodulating System with Temperature Compensation

High-Spatial-Resolution High-Temperature Sensor Based on Ultra-Short Fiber Bragg Gratings With Dual-Wavelength Differential Detection

Strain, bending, refractive index independent temperature sensor based on a graded index multimode fiber embedded long period fiber grating

High Sensitivity Refractometer Based on Tapering Two-Mode Fiber Embedded Long-Period Fiber Grating

[Research on spectrum correction algorithm of temperature measurement system based on FBG]

An Optical Fiber Tip Micrograting Thermometer

Few-mode fiber-embedded long-period fiber grating for simultaneous measurement of refractive index and temperature

Temperature Sensing Of Stepped-Metal Coated Optical Fiber Bragg Grating With The Restructured Dual-Peak Resonance

Sensing characteristics of long period grating by writing directly in SMF-28 based on 800 nm femtosecond laser pulses

A Compact First-Order Bragg Grating in a Tapered Fiber Probe for High Temperature Sensing

Bragg grating tuned fiber laser system for measurement of wider range temperature and strain

Simultaneous pressure and temperature measurement using Hi-Bi fiber Bragg gratings

Fiber Bragg grating sensing system for temperature measurements based on optically injected DFB-LD with an OEO loop

Simultaneous strain and temperature measurement by cascading few-mode fiber and single-mode fiber long-period fiber gratings

High-Resolution Strain/Temperature Sensing System Based on A High-Finesse Fiber Cavity and Time-Domain Wavelength Demodulation

Micro-Tapered Fiber Few-Mode Interferometers Incorporated by Molecule Self-Assembly Fiber Grating for Temperature Sensing Applications