Abstract:A series of isotactic polypropylene/poly(propylene-1-octene) (iPP/PPOc) in-reactor alloys were synthesized by a one-step polymerization process, using Metallocene/Ziegler–Natta hybrid catalyst. The alloys were characterized by FT-IR, DSC, optical microscopy and SEM. The results suggested that the spherical morphology was maintained during one-step polymerization process, which provided a potential application for one-step polyolefin in-reactor alloys. A characteristic “shell–core” structure of the nascent alloy particles was observed for the first time. This phenomenon may be due to the difference between the homopolymerization and copolymerization rate at different active centers. It was also found that the majority of the elastomers in the matrix were homogeneously distributed in the alloys. The introduction of the relatively long 1-octene branches could effectively reduce the crystal size and the crystallinity of the obtained iPP/PPOc alloys and made it possible to vary their rigidity and elasticity in a wide range. The crystallization kinetics of the alloys with pure iPP was also investigated. With the increase of elastomer content, an increase of nucleation density (the nuclei number per unit area) and the decrease of crystal perfection could be clearly observed. In comparison with pure PP, the overall crystallization rates and the growth rates of the spherulites of the alloys decreased obviously. These results indicated that the growth rate of the spherulites was the decisive step for the overall crystallization rate in this case, which can be explained on the basis of dilution effect and obstruction effect on the mobility of PP chains in the propylene–octene copolymer. Investigation of the mechanical properties indicated that notched Izod impact strength of iPP/PPOc alloys have obviously increased in comparison with that of pure iPP. The improvement of impact strength can be mainly attributed to the increase of random copolymer content. Based on the understanding of microstructure and phase morphology, the correlation between morphological structure and mechanical properties has been established.

Morphology and mechanical properties of polypropylene/poly (propylene-1-octene) in-reactor alloys prepared by Metallocene/Ziegler-Natta hybrid catalyst

Regulation of Structure and Mechanical Properties of Poly(propylene-Butene) Alloys by Monomer Composition Switching

Research on Toughening Modification of Copolymerized Polypropylene Using Polyolefin Elastomers

Enhanced Multiphase Interfacial Interaction of Impact Polypropylene Copolymer by In-Situ Introducing Polyethylene

A Convenient, Highly-Efficient Method for Preparation of Hydroxyl-Terminated Isotactic Poly（propylene） and Functional Di-Block Copolymer

Structure and Morphology of Polyethylene/polypropylene In‐reactor Alloys Synthesized by Spherical High‐yield Ziegler–Natta Catalyst

Structure and Properties of Isotactic Polypropylene/Polybutene-1 In-reactor Alloys

Morphology and properties of PP in-reactor alloys prepared with a MgCl2/TiCl4/diisobutyl phthalate/phosphate tris-methylphenyl ester catalyst system

Effect of the Structure on the Morphology and Spherulitic Growth Kinetics of Polyolefin In‐reactor Alloys

Nascent Phase Separation and Crystallization Kinetics of an Ipp/Peoc Polymer Alloy Prepared on A Single Multicatalyst Reactor Granule

Controlled properties of high-impact polypropylene in-reactor alloys by tailoring chemical structure and morphology

Tailoring the mechanical properties of binary polypropylene blends with polymorphic and oriented hierarchical structures

Influence of Polymerization Conditions on the Structure and Properties of Polyethylene/polypropylene In‐reactor Alloy Synthesized in the Gas Phase with a Spherical Ziegler–Natta Catalyst

Solvent and solvation effects on reactivities and mechanisms of phospho group transfers from phosphate and phosphinate esters to nucleophiles

Influence Of Cocatalyst On The Structure And Properties Of Polypropylene/Poly (Ethylene-Co-Propylene) In-Reactor Alloys Prepared By Mgcl2/Ticl4/Diester Type Ziegler-Natta Catalyst

Mechanisms of Nucleation and Crystal Growth in A Nascent Isotactic Polypropylene/Poly (Ethylene-Co-octene) In-Reactor Alloy Investigated by Temperature-Resolved Synchrotron Saxs and Dsc Methods

Microstructure analysis of polypropylene reactor alloy

Investigation of the crystallization behavior of isotactic polypropylene polymerized with different Ziegler-Natta catalysts

Influence of Copolymerization Conditions on the Structure and Properties of Polyethylene/Polypropylene/Poly(Ethylene-Co-Propylene) In-Reactor Alloys Synthesized in Gas-Phase with Spherical Ziegler-Natta Catalyst

Fabrication of Hierarchically Crystallographic Morphologies in Isotactic Polypropylene

Investigation of the stereodefect distribution and conformational behavior of isotactic polypropylene polymerized with different Ziegler-Natta catalysts