Abstract:A series of isotactic polypropylene/poly(propylene-1-octene) (iPP/PPOc) in-reactor alloys were synthesized by a one-step polymerization process, using Metallocene/Ziegler–Natta hybrid catalyst. The alloys were characterized by FT-IR, DSC, optical microscopy and SEM. The results suggested that the spherical morphology was maintained during one-step polymerization process, which provided a potential application for one-step polyolefin in-reactor alloys. A characteristic “shell–core” structure of the nascent alloy particles was observed for the first time. This phenomenon may be due to the difference between the homopolymerization and copolymerization rate at different active centers. It was also found that the majority of the elastomers in the matrix were homogeneously distributed in the alloys. The introduction of the relatively long 1-octene branches could effectively reduce the crystal size and the crystallinity of the obtained iPP/PPOc alloys and made it possible to vary their rigidity and elasticity in a wide range. The crystallization kinetics of the alloys with pure iPP was also investigated. With the increase of elastomer content, an increase of nucleation density (the nuclei number per unit area) and the decrease of crystal perfection could be clearly observed. In comparison with pure PP, the overall crystallization rates and the growth rates of the spherulites of the alloys decreased obviously. These results indicated that the growth rate of the spherulites was the decisive step for the overall crystallization rate in this case, which can be explained on the basis of dilution effect and obstruction effect on the mobility of PP chains in the propylene–octene copolymer. Investigation of the mechanical properties indicated that notched Izod impact strength of iPP/PPOc alloys have obviously increased in comparison with that of pure iPP. The improvement of impact strength can be mainly attributed to the increase of random copolymer content. Based on the understanding of microstructure and phase morphology, the correlation between morphological structure and mechanical properties has been established.

Nascent Phase Separation and Crystallization Kinetics of an Ipp/Peoc Polymer Alloy Prepared on A Single Multicatalyst Reactor Granule

Mechanisms of Nucleation and Crystal Growth in A Nascent Isotactic Polypropylene/Poly (Ethylene-Co-octene) In-Reactor Alloy Investigated by Temperature-Resolved Synchrotron Saxs and Dsc Methods

Effects of Liquid–liquid Phase Separation on Crystallization Kinetics and Morphology of Isotactic Polypropylene/poly (Ethylene-Co-octene) In-Reactor Alloy

Enhanced Multiphase Interfacial Interaction of Impact Polypropylene Copolymer by In-Situ Introducing Polyethylene

Study on Liquid-Liquid Phase-Separation and Its Effect on the Crystallization Kinetics of Blends Composed of Isotactic Polypropylene/Ethylene-Propylene Rubber

Morphology and mechanical properties of polypropylene/poly (propylene-1-octene) in-reactor alloys prepared by Metallocene/Ziegler-Natta hybrid catalyst

Effect of the Structure on the Morphology and Spherulitic Growth Kinetics of Polyolefin In‐reactor Alloys

Phase morphology of nascent impact polypropylene copolymer and its evolution in the melt

Investigation of Nascent Polypropylene In-Reactor Alloy Particles

Morphology of Polypropylene/Poly(Ethylene-Co-Propylene) In-Reactor Alloys Prepared by Multi-Stage Sequential Polymerization and Two-Stage Polymerization

Structure and Morphology of Polyethylene/polypropylene In‐reactor Alloys Synthesized by Spherical High‐yield Ziegler–Natta Catalyst

Isothermal and Non-Isothermal Crystallization Studies of Long Chain Branched Polypropylene Containing Poly(ethylene-co-octene) under Quiescent and Shear Conditions

Regulation of Phase Separation in PP/EPR In-Reactor Alloy and Its Effect on Crystallization Kinetics

Shear Amplification and Re-Crystallization of Isotactic Polypropylene from an Oriented Melt in Presence of Oriented Clay Platelets

The effect of phase separation on crystallization of polyethylene/poly(ethylene-alt-propylene) blend

Interplay of Crystallization and Liquid–liquid Phase Separation in Polyolefin Blends: A Thermal History Dependence Study

Effect of phase separation on overall isothermal crystallization kinetics of PP/EPR in-reactor alloys

Interfacial crystallization and its mechanism in in-situ dynamically vulcanized iPP/POE blends

Nonisothermal Crystallization Nucleation of In‐Situ Fibrillar and Spherical Inclusions in Poly (Phenylene Sulfide)/Isotactic Polypropylene Blends

Shear-Induced Crystallization in Phase-Separated Blend of Isotactic Polypropylene and Poly (Ethylene-Co-octene)

Effect of phase separation on spherulitic growth rate of PP/EPR in-reactor alloys