Abstract:PB‐g‐PS graft copolymer with core‐shell structure was prepared by emulsion polymerization. The matrix toughness was provided by the core phase (PB), while the shell phase (PS) has good compatibility with PPO, which ensured that the core‐shell particles of PB‐g‐PS can be uniformly dispersed in the PPO/PS matrix. It is found that the impact toughness of PPO/PS blends can be effectively improved by controlling the core‐shell ratio of PB‐g‐PS graft copolymer. A series of polybutadiene‐graft‐polystyrene (PB‐g‐PS) graft copolymers with different core–shell ratios (PB/PS) are synthesized using emulsion polymerization. Subsequently, the PB‐g‐PS graft copolymers are blended with polyphenylene oxide (PPO) and polystyrene (PS) to prepare PPO/PS/PB‐g‐PS blends with varying compositions. The effects of the core–shell ratio of PB‐g‐PS graft copolymer and matrix composition on the mechanical properties, micromorphology, and deformation mechanism of the blends are investigated. The results show that the synthesized PB‐g‐PS graft copolymer has extremely high toughening efficiency. The blends with high toughness and excellent processability can be prepared by introducing it and PS into PPO at the same time, and then obtain better end‐use properties and broaden the applications. With the increase of the core‐shell ratio of PB‐g‐PS graft copolymer, the rubber particles gradually gather in the matrix. With an increase of PPO content in the matrix, the rubber particles gradually become uniformly dispersed, the impact strength and yield strength of the blends gradually increase, the coarseness of the impact fracture surface of the blends gradually increase, and massive elongated cavities appear. The blends undergo a brittle ductile transition, and its deformation mechanism change from the initial cracking to shear yielding.

The influence of the internal structure of core-shell particles on poly(vinyl chloride)/(methyl methacrylate-butadiene-styrene) blends

Variation of core-shell structural particles and their toughening behavior in poly (vinyl chloride) (PVC) matrix

Effect of Core-Shell Particles Dispersed Morphology on the Toughening Behavior of PBT/PC Blends

Influence of Core-Shell Particles Structure on the Morphology and Brittle-Ductile Transition of Pbt/Abs-G-Gma Blends

Preparation of PBT/POE‐g‐GMA/PP Ternary Blends with Good Rigidity–toughness Balance by Core–shell Particles

The toughening mechanism of core-shell particles by the interface interaction and crystalline transition in polyamide 1012

Effect of PBT Resin on the Structure and Properties of Core-Shell Particles Toughened PC

Modification of the Reactive Core-Shell Particles Properties to Prepare PBT/PC Blends with Higher Toughness and Stiffness

Effect of Mixing Sequence on Phase Morphology and Mechanical Properties in Polyamide 6/butadiene (core) Styrene Acrylonitrile-G-Maleic Anhydride (shell) Latex/Organoclay Ternary Nanocomposites

Influence of the structure of sub‐micrometer core‐shell rubber particles and matrix composition on the mechanical properties, morphological structure and deformation mechanism of rubber‐modified polyphenylene oxide/polystyrene blends

Inhibited Transesterification on the Properties of Reactive Core-Shell Particles Toughened Poly(Butylene Terephthalate) and Polycarbonate Blends

In Situ Formation of the Core–Shell Particles and Their Function in Toughening PA6/SEBS-g-MA/PP Blends

Deformation and Molecular Orientation in Films of Metallocene Polypropylene, Ethylene-Butylene Rubber, and Their 80/20 (W/W) Blend Revealed by the Simultaneous Kinetic Measurement of Microscopic Infrared Dichroism, Macroscopic Stress, and Mesoscale Strain

SYNTHESIS, CHARACTERIZATION AND CROSSLINKING REACTION OF REACTIVE COMPOSITE LATEX

Synergistic Effect of Polycarbonate on Reactive Core-Shell Particles Toughened Poly (butylene Terephthalate)

Toughening of Pbt/Pc Blends with Epoxy Functionalized Core-Shell Modifiers

Melt Rheology of Core-Shell Nanoparticles Filled Polystyrene

Effect of Core-shell Ratio of the Modifier on the Properties of Toughened Polylactide Acid

Rheology Study on Polypropylene Blends with in situ Core-Shell Dispersed Particles

Modification of the Core–shell Ratio to Prepare PB-g-(MMA-co-St-co-GMA) Particle-Toughened Poly(butylene Terephthalate) and Polycarbonate Blends with Balanced Stiffness and Toughness

Toughening of PA6 Nanocomposites by Reactive Acrylonitrile–butadiene–styrene Core–shell Rubber Particles