Abstract:The positively charged polystyrene (PS) particles with a size of ca. 200nm were synthesized by soap-free polymerization. The PS cores were coated with silica shells of tunable thickness employing the modified Stöber method. The PS cores were removed by thermal decomposition at 500°C, resulting in well-defined silica hollow spheres (10–30nm in shell thickness). The elastic response of the as-synthesized samples was probed by an atomic force microscope (AFM). A point load was applied to the particle surface through a sharp AFM tip, and the force–displacement curves were recorded. Elastic moduli (E) for the PS particles (2.01±0.70GPa) and the core–shell structured hybrid particles were determined on the basis of Hertzian contact model. The calculated E values of composites exhibited a linear dependence on the silica shell thickness. While the shell thickness increased from ca. 10 to 15 and 20nm, the E values of composites increased from 4.42±0.27 to 5.88±0.48 and 9.07±0.94GPa. For core–shell structured organic/inorganic composites, the E values of the hybrid particles were much lower than those of inorganic shells, while these values were much close to those of organic cores. Moreover, the moduli of elasticity of the composites appeared to be determined by the properties of the polymer cores, the species of inorganic shells and the thickness of shells. Besides, the inorganic shells enhanced the mechanical properties of the polymer cores. This work will provide essential experimental and theoretical basis for the design and application of core–shell structured organic/inorganic composite abrasives in chemical mechanical polishing/planarization.

Melt Rheology of Core-Shell Nanoparticles Filled Polystyrene

Viscoelasticity of Shell-Crosslinked Core–shell Nanoparticles Filled Polystyrene Melt

Viscoelastic Behaviors of Shell‐crosslinked Core–shell Nanoparticles Suspended in Polystyrene Solutions

Silica-Coated Core-Shell Structured Polystyrene Nanospheres and Their Size-Dependent Mechanical Properties.

Thermosets with core–shell nanodomain by incorporation of core crosslinked star polymer into epoxy resin

Preparation and Application of Submicron Polystyrene/Polysiloxane Core/Shell Particles

Preparation of Polystyrene/Sio2 Composite Nanoparticles Bearing Sulfonic Groups on the Surface Via Emulsion Copolymerization Using A Polymerizable Emulsifier

Synthesis Of Hybrid Core-Shell Nanoparticles By Emulsion (Co)Polymerization Of Styrene And Gamma-Methacryloxypropyltrimethoxysilane

Exploring the Elastic Behavior of Core–shell Organic–Inorganic Spherical Particles by AFM Indentation Experiments

Mechanism and Process of the Redispersion of the Aggregated Nano-Sio2 Particles During Emulsion Polymerization of Styrene

Synthesis of Hybrid Core−Shell Nanoparticles by Emulsion (co)polymerization of Styrene and Γ-Methacryloxypropyltrimethoxysilane

Preparation and characterization of micron-sized polystyrene/polysiloxane core/shell particles

Preparation of Epoxy‐functionalized Polystyrene/silica Core–shell Composite Nanoparticles

Effect of hollow structure and covalent bonding on the mechanical properties of core–shell silica nanoparticles modified poly(methyl acrylate) composites

Thermal and Rheological Analysis of Polystyrene-Grafted Silica Nanocomposites

Preparation of Polystyrene–polyisoprene Core–shell Nanoparticles for Reinforcement of Elastomers

Synthesis and Characterization of Polystyrene/Nanosilica Organic-Inorganic Hybrid

Core-Shell-Corona Silica Hybrid Nanoparticles Templated by Spherical Polyelectrolyte Brushes: A Study by Small Angle X-ray Scattering.

Synthesis of hybrid core-shell nanoparticles by emulsion (Co)polymerization of styrene and γ-methacryloxypropyltrimethoxysilane

Silica nanoparticles encapsulated by polystyrene via surface grafting and in situ emulsion polymerization

Atomic Force Microscopy Indentation to Determine Mechanical Property for Polystyrene–silica Core–shell Hybrid Particles with Controlled Shell Thickness