Abstract:Complex wells with high temperature and the presence of carbon dioxide and hydrogen sulfide acid gas require the use of high-temperature and high-density anti-corrosion cement slurry for cementing operations, and conventional cement slurry does not have the advantages of high density, high-temperature resistance, or corrosion resistance. In order to avoid the severe corrosion of cement slurry by carbon dioxide and hydrogen sulfide at high temperatures, solid phase particles with different particle sizes are combined with polymer materials to form a dense, high-density, high-temperature- and corrosion-resistant cement slurry. In this paper, we consider the use of manganese ore powder weighting agent, composite high-temperature stabilizer, inorganic preservative slag and organic preservative resin to improve the corrosion resistance of cement slurry, design a high-density cement slurry that is resistant to high temperature and carbon dioxide and hydrogen sulfide corrosion, and evaluate the performances of the cement slurry at 180 °C. The results show that the manganese ore powder weighting agent effectively improves the density of the cement slurry. Using composite silica fume with different particle sizes as a high-temperature stabilizer can ensure the rheology of the cement slurry and improve the ability of the cement sample to resist high-temperature damage. The use of slag and resin as preservatives can effectively reduce the corrosion degree in cement slurry. The high-temperature corrosion-resistant cement slurry systems with different densities designed using these materials exhibit good rheological properties, with water loss of less than 50 mL and a thickening time of more than four hours. The compressive strength decreased by less than 5.8% after 28 days at high temperatures. After being corroded by hydrogen sulfide and carbon dioxide (total pressure 30 MPa, 16.7% hydrogen sulfide and 6.7% carbon dioxide) under high temperature (180 °C) for 30 days, the corrosion depth of the cement sample was less than 2 mm, the reduction of compressive strength was low, and the corrosion resistance was strong. These research results can be used for cementing operations of high-temperature oil and gas wells containing hydrogen sulfide and dioxide.

Properties and Microstructure of Oil-Well Cement Stone Attacked by Vitriol

Long-term Thermal Performance of Oil Well Cement Modified by Silica Flour with Different Particle Sizes in HTHP Environment

Effect of polymer on the microstructure and resistance to corrosion of oil well cement stones

Study on the properties of nano silica modified cement for cementing

Critical Features of Microstructure Development of Early-Age Cement Paste Revealed by Non-Contact Electrical Resistivity Measurement

Microstructural Variation of Hardened Cement-slag Pastes Leached by Soft Water

Influence of organic acids on the corrosion performance of reinforcement and material properties of cement paste

Acid Attack on Cement Paste Containing Limestone Powder

Carbon Dioxide Corrosion and Corrosion Prevention of Oil Well Cement Paste Matrix in Deep Wells

Study on dynamic mechanical properties and damage characteristics of wollastonite fiber reinforced oil well cement paste

Effect of CO2 solution on Portland cement paste under flowing, migration, and static conditions

Hybrid Effect of Wollastonite Fiber and Carbon Fiber on the Mechanical Properties of Oil Well Cement Pastes

Study on Strength and Microstructure of Cement Pastes Containing Limestone Powder under Flowing Acid Solution Condition

MICROSTRUCTURE FORMATION AND INVALIDATION MECHANISM OF SEALANT IN THE SIMULATED ENVIRONMENT AT THE BOTTOM OF OIL-WELL

Study on the Oil Well Cement-Based Composites to Prevent Corrosion by Carbon Dioxide and Hydrogen Sulfide at High Temperature

Research on Carbon Dioxide Corrosion of Cement Stones of Oil Well Casings under High Temperature and High Pressure

Effect of Supplementary Cementitious Materials on the Resistance of Cement Paste to Carbonic Acid Water

Production of amorphous aluminosilicate and vaterite from acid leaching of hydrated cement paste

Difference between microstructure variation of hardened cement pastes with different water-to-cement ratios leached by soft water

Study on multicomponent composite anti-corrosion cement slurry system suitable for ultra-high temperature acid gas wells

Influence of Latex on the Hydration Products and Microstructure of Oil Well Cement Pastes