Abstract:Complex wells with high temperature and the presence of carbon dioxide and hydrogen sulfide acid gas require the use of high-temperature and high-density anti-corrosion cement slurry for cementing operations, and conventional cement slurry does not have the advantages of high density, high-temperature resistance, or corrosion resistance. In order to avoid the severe corrosion of cement slurry by carbon dioxide and hydrogen sulfide at high temperatures, solid phase particles with different particle sizes are combined with polymer materials to form a dense, high-density, high-temperature- and corrosion-resistant cement slurry. In this paper, we consider the use of manganese ore powder weighting agent, composite high-temperature stabilizer, inorganic preservative slag and organic preservative resin to improve the corrosion resistance of cement slurry, design a high-density cement slurry that is resistant to high temperature and carbon dioxide and hydrogen sulfide corrosion, and evaluate the performances of the cement slurry at 180 °C. The results show that the manganese ore powder weighting agent effectively improves the density of the cement slurry. Using composite silica fume with different particle sizes as a high-temperature stabilizer can ensure the rheology of the cement slurry and improve the ability of the cement sample to resist high-temperature damage. The use of slag and resin as preservatives can effectively reduce the corrosion degree in cement slurry. The high-temperature corrosion-resistant cement slurry systems with different densities designed using these materials exhibit good rheological properties, with water loss of less than 50 mL and a thickening time of more than four hours. The compressive strength decreased by less than 5.8% after 28 days at high temperatures. After being corroded by hydrogen sulfide and carbon dioxide (total pressure 30 MPa, 16.7% hydrogen sulfide and 6.7% carbon dioxide) under high temperature (180 °C) for 30 days, the corrosion depth of the cement sample was less than 2 mm, the reduction of compressive strength was low, and the corrosion resistance was strong. These research results can be used for cementing operations of high-temperature oil and gas wells containing hydrogen sulfide and dioxide.

Enhancing the CO2-H2S corrosion resistance of oil well cement with a modified epoxy resin

Study on the properties of nano silica modified cement for cementing

Research on Carbon Dioxide Corrosion of Cement Stones of Oil Well Casings under High Temperature and High Pressure

Influence of oil well cement on the structure and properties of thermosetting resin cementing fluids

Carbon Dioxide Corrosion and Corrosion Prevention of Oil Well Cement Paste Matrix in Deep Wells

Corrosion Characteristics of Polymer-Modified Oil Well Cement-Based Composite Materials in Geological Environment Containing Carbon Dioxide

Effect of polymer on the microstructure and resistance to corrosion of oil well cement stones

Study on the Oil Well Cement-Based Composites to Prevent Corrosion by Carbon Dioxide and Hydrogen Sulfide at High Temperature

Study on water-based epoxy resin cementing fluid system

Study on an Epoxy Resin System Used to Improve the Elasticity of Oil-Well Cement-Based Composites

Corrosion integrity of oil cement modified by environment responsive microspheres for CO2 geologic sequestration wells

Preparation of Nano-SiO2/Carbon Fiber-Reinforced Concrete and Its Influence on the Performance of Oil Well Cement

Study on Improving the Toughness of Silicate Cement Stone by Modified Epoxy Resin

Effect of CO2 solution on Portland cement paste under flowing, migration, and static conditions

Degradation of chemical and mechanical properties of cements with different formulations in CO2-containing HTHP downhole environment

Study on multicomponent composite anti-corrosion cement slurry system suitable for ultra-high temperature acid gas wells

Study on the Preparation and Anti-CO 2 Corrosion Performance of Soap-Free Latex for Oil Well Cement

Rheological and mechanical properties of oil-well cement reinforced by hybrid inorganic fibers

Design and Evaluation of the Elastic and Anti-Corrosion Cement Slurry for Carbon Dioxide Storage

Preparation of epoxy resin elastic particles and their application in oil well cement

Study on the Compressive and Tensile Properties of Latex-Modified Cement Stone