Abstract:Bifunctional reactive polyhedral oligomeric silsesquioxane (POSS) of 3, 13-divinyl octyphenyl silsesquioxane (DV-DDSQ) and 3, 13-dihydro octyphenyl silsesquioxane (DH-DDSQ) were used as additive to modify ethylene-propylene-diene rubber (EPDM), and double vinyl groups or active hydrogen groups of bifunctional reactive POSS (brPOSS) underwent a cross-linking reaction with the active hydrogen groups and double bonds of EPDM, to investigate the effect of brPOSS regulating functional reaction group on the properties of EPDM. Crosslinking density, mechanical properties, thermal stability and ablation performance of brPOSS modified EPDM were investigated, and the pyrolysis behavior and surface structure of modified EPDM was analyzed by X-ray photoelectron spectroscopy (XPS) and scanning electron microscopy (SEM). Furthermore, the ablation performance of brPOSS modified insulation based on EPDM was investigated. The results showed that the tensile strength of EPDM/DV-DDSQ and EPDM/DH-DDSQ increased by 35.8% and 55.3% respectively compared with EPDM; the tear strength increased by 6.4% and 5% than that of EPDM. Moreover, the 5% initial thermal decomposition temperature based on thermogravimetric analysis (TGA) and mass (or linear) ablation rate ablative performance of brPOSS modified EPDM were optimized to a certain extent, and the ablative performance of brPOSS modified insulation based on is significantly improved, the mass ablation rate of DV-DDSQ/insulation and DH-DDSQ/insulation decreased by 35.4% and 41.6% respectively, and linear ablation rate decreased by 38.2% and 39.4% respectively.

Structure and Properties of Peroxide Dynamically Vulcanized Polypropylene/Ethylene-Propylene-Diene/Zinc Dimethacrylate Composites

Regulation of Structure and Mechanical Properties of Poly(propylene-Butene) Alloys by Monomer Composition Switching

Improving the flame retardancy and mechanical properties of high-density polyethylene-g-maleic anhydride with a novel organic metal phosphonate

Mechanical properties and structural characteristics of dynamically photocrosslinked PP/EPDM blends

Dynamically photocrosslinking of polypropylene/EPDM blends as a thermoplastic elastomer

Mechanical properties, morphological structure, and thermal behavior of dynamically photocrosslinked PP/EPDM blends

Mechanical Properties and Thermal Behaviors of Dynamically Photocrosslinked PP/EPDM Blends

Reactive processing of PA6/EPDM‐MA blends as modifier for application and development of high‐performance polypropylene

Polymer Blends of Pbt and Pp Compatibilized by Epoxidized Ethylene Propylene Diene Rubber

Synergistic Effect of Sbs and Trimethylopropane Trimethacrylate (tmptma) on Dynamically Vulcanized Sebs/Pp Blends

Effect of the synergistic interaction of zinc adipate, hydrotalcite and ethylene propylene rubber on the performances of polypropylene

Toughening of Polypropylene Highly Filled with Aluminum Hydroxide

Modification of EPDM by CaCO_3 and ZDMA

Preparation of PBT/POE‐g‐GMA/PP Ternary Blends with Good Rigidity–toughness Balance by Core–shell Particles

Preparation and Flammability of Epdm/Pp/Mg(Oh)(2) Dynamic Vulcanizates

Synergistic effect of styrene and zinc dimethyldithiocarbamate on the properties of high melt strength polypropylene

Effects of difunctional reactive polyhedral oligomeric silsesquioxane on the properties of EPDM

Improved mechanical properties and special reinforcement mechanism of natural rubber reinforced by in situ polymerization of zinc dimethacrylate

A new strategy for improving high‐temperature mechanical properties of HNBR/ZDMA composites through polymerization of ZDMA promoted by zinc methylmercaptobenzimidazole

Toughening of Poly(ethylene Terephthalate) and Optimizing of the Compatibilization Between PET and EPDM by Functionalized EPDM

The Cellular Structure and Mechanical Properties of Polypropylene/Nano-CaCO3/Ethylene-propylene-diene-monomer Composites Prepared by an In-Mold-Decoration/Microcellular-Injection-Molding Process