Abstract:The poor compatibility between the common polar intumescent flame-retardant system (IFR) and the nonpolar polypropylene (PP), as well as the high additive amount, seriously impacts the mechanical properties of the composites. This study introduced collaborative flame-retardant technology to construct block copolymer flame retardants and prepared a zinc-embedded multicomponent copolymer (PM-Zn2+) customized for PP composites. In the PM-Zn2+ system, zinc oxide was embedded into the copolymer composed of piperazine phosphate oligomer and melamine phosphate. PM-Zn2+ exhibited an amorphous structure with extremely low crystallinity and demonstrated specific morphological adaptability. The PM-Zn2+ were well dispersed in the PP matrix and changed their morphology during processing. When applied to PP, excellent flame retardancy and mechanical properties were obtained by using a minimal amount of flame retardants (20%). PM-2%Zn2+ gave PP an LOI value of 31.5%, and achieved a UL94 V-0 rating (1.6 mm thick), exhibiting a lower heat release rate and smoke release. The flame-retardant mechanisms of PM-Zn2+ mainly involved the synergistic and aggregative effects. Transition metal zinc synergistically interacted with polyphosphate groups to create a charring barrier effect and enhance synergistic smoke suppression, leading to a significant reduction in combustion intensity. In comparison to the Mix-Zn/PP composites, the mechanical properties of PM-Zn2+/PP were significantly enhanced due to the specific morphological adaptability and improved compatibility. The elongation at break increased significantly from 15.6% to 627.9%, marking a remarkable improvement of 40-fold improvement, while the impact strength rose from 23.7kJ/m2 to 54.3kJ/m2, representing a 129% enhancement. Finally, the zinc-embedded multicomponent block copolymer offers a promising approach to developing high-performance flame-retardant polypropylene materials.

Improving the flame retardancy and mechanical properties of high-density polyethylene-g-maleic anhydride with a novel organic metal phosphonate

A Novel Zinc Chelate Complex Containing Both Phosphorus and Nitrogen for Improving the Flame Retardancy of Low Density Polyethylene

A phosphorus-, nitrogen- and carbon-containing polyelectrolyte complex: preparation, characterization and its flame retardant performance on polypropylene

Improving the Flame Retardancy Efficiency and Mechanical Properties of the Intumescent Flame Retarded Low‐density Polyethylene by the Dual Actions of Polyurea Microencapsulation and Aluminum Hypophosphite

A novel phytic acid based flame retardant to improve flame retardancy, hydrophobicity and mechanical properties of linear low‐density polyethylene

A Zinc-Embedded Multicomponent Copolymer Customized for Polypropylene and Its Synergistic Flame-Retardant Effect and Outstanding Mechanical Properties

Effects of iron-based metal–organic framework-MIL-53(Fe) and phosphorus-based flame retardants on the flame retardancy of high-density polyethylene

Hyperbranched Polyamide-Amine Based Phosphorous-Containing Flame Retardant for Simultaneous Flame Retardancy and High Performance of Polypropylene

Effect of maleic anhydride grafted EPDM on properties of intumescent flame retardant PP materials

In-situ co-precipitation synthesis of Zn/Fe-LDH modified melamine polyphosphate for enhanced flame retardancy in polypropylene

Effects of alpha-zirconium phosphate and zirconium organophosphonate on the thermal, mechanical and flame retardant properties of intumescent flame retardant high density polyethylene composites

Synergistic Flame Retardancy of Linear Low-Density Polyethylene with Surface Modified Intumescent Flame Retardant and Zinc Borate

Fabrication of Flame Retardant Poly(methyl methacrylate) with Excellent Comprehensive Properties Based on a New Phosphorus-silicon-Nitrogen-Synergistic System

Functionalizing MXene with PEPA‐containing polyphosphazene towards highly fire‐safe polypropylene

Synthesis and Flame Retardant Behavior of Phosphorous- and Nitrogen-Containing Copolymer and Its Application in Polypropylene

Surface modification of zinc oxide and its application in polypropylene with excellent fire performance and ultra-violet resistance

Flame-retardant Effects of NH2-MIL-53(Al) in Combination with Phosphorus-Containing and Nitrogen-Containing Flame Retardants on Polypropylene

Effects of Zinc Borate and Microcapsulated Red Phosphorus on Mechanical Properties and Flame Retardancy of Polypropylene/magnesium Hydroxide Composites

The synergistic action between anhydride grafted carbon fiber and intumescent flame retardant enhances flame retardancy and mechanical properties of polypropylene composites

An Efficient and Convenient Strategy Toward Fire Safety and Water Resistance of Polypropylene Composites Through Design and Synthesis of a Novel Mono‐component Intumescent Flame Retardant

Fabrication of ZrP Nanosheet Decorated Macromolecular Charring Agent and Its Efficient Synergism with Ammonium Polyphosphate in Flame-Retarding Polypropylene