Abstract:In this study, a 10–50 nm Co32Fe30W38 alloy thin film sputtered on glass substrates was annealed at different temperatures for 1 h including room temperature (RT), 300, 350, and 400 °C. The structure, magnetic properties, surface energy, and optical properties of the Co32Fe30W38 alloy were studied. X-ray diffraction (XRD) patterns of the as-deposited Co32Fe30W38 thin films showed the amorphous structure. The apparent body-centered cubic (BCC) CoFe (110) structure was exhibited after 300 °C annealing for 1 h. The 300 °C annealed Co32Fe30W38 thin film showed the highest CoFe (110) peak compared with other temperatures. Furthermore, the thicker the Co32Fe30W38 thin film, the higher the CoFe (110) peak. The CoFe (110) peak revealed magneto-crystalline anisotropy, which was related to the strong low-frequency alternative-current magnetic susceptibility (χac) and induced an increasing trend of saturation magnetization (Ms) as the thickness (tf) increased. Due to the thermal disturbance, the χac and Ms for the 350 and 400 °C annealed Co32Fe30W38 thin film decreased. The contact angles of the Co32Fe30W38 thin films were less than 90°. For all temperatures, the surface energy increased when the film thickness increased from 10 to 50 nm. In addition, the surface energies for annealed samples were comparatively higher than the as-deposited samples. The higher surface energy of 28 mJ/mm2 was obtained for the 50 nm Co32Fe30W38 thin film annealed at 300 °C. The transmittance percentage (%) of the as-deposited Co32Fe30W38 film was higher than other annealed conditions. This result contributed to the fact that higher crystallization, due to perfect band structures, may inhibit the transmission of photon signals through the film, resulting in low transmittance and high absorption.

The Effect of Thermal Annealing on the Microstructure and Mechanical Properties of Magnetron Sputtered Hydrogenated Amorphous Carbon Films

Effect of Unbonded Hydrogen on Amorphous Carbon Film Deposited by PECVD with Annealing Treatment

The effect of hydrogen plasma chemical annealing on electron field emission of amorphous carbon films

The Stability of Nitrogen-Containing Amorphous Carbon Films after Annealing at Moderate Temperatures

Properties of Tetrahedral Amorphous Carbon Films Deposited in a Filtered Cathodic Arc in the Presence of Hydrogen

Study on effect of hydrogen treatment on amorphous carbon film using scanning probe microscopy

Improvement of electron field emission from amorphous carbon films due to hydrogen plasma chemical annealing effect

Investigation On Structure And Physical Properties Of Hydrogenated Amorphous Carbon Films

Post-annealing effect in reactive r.f.-magnetron-sputtered carbon nitride thin films

Annealing Effect On The Microstructure Modification And Tribological Properties Of Amorphous Carbon Nitride Films

Growth Mechanism of Hydrogenated Amorphous Carbon Films: Molecular Dynamics Simulations

Influence of Annealing Temperature on Thermal Stabilities of Hydrogenated Amorphous Carbon on Silicon Nitride Balls

The Microstructural Studies of Hydrogenated Amorphous Carbon Films by Raman Spectra

Comparative Study of the Tribology of Amorphous Carbon Films Via Magnetron Sputtering Depending on the Different Magnetic Field

The Effect of Annealing Temperature on Structures and GMR in Co-Ag Granular Films

Postannealing Effect on Properties of Hydrogenated Amorphous Si(Mn) Magnetic Semiconductors

Effect of Annealing on the Structural, Magnetic, Surface Energy and Optical Properties of Co32Fe30W38 Films Deposited by Direct-Current Magnetron Sputtering

Verification Study of Nanostructure Evolution with Heating Treatment Between Thin and Thick Fullerene-Like Hydrogen Carbon Films

Hydrogen Existence State of a Hydrogenated Amorphous Carbon Coating and Its Thermal Stability

Effect of annealing on the mechanical and scratch properties of BCN films obtained by magnetron sputtering deposition

Annealing Behavior and Hardness Enhancement of Amorphous Sicn Thin Films