Abstract:The development of high-performance integrated circuit chips and the shrinkage of feature sizes according to Moore’s law bring forward continuously the requirements for low dielectric constant (low-k) materials with various excellent properties in the back-end-of-the-line (BEOL) interconnect. Porous SiCOH films prepared by plasma enhanced chemical vapor deposition (PECVD) through a porogen approach are widely applied to industry and extensively studied. Thermal annealing is an important process for fabricating the porous low-k films, which has a great influence on film structure as well as properties. SiCOH films are deposited by PECVD using tetraethoxysilane and limonene as precursors, and annealed at 450 ℃ for 1.5 h under nitrogen atmosphere. The evolutions of film structure and properties during thermal annealing are revealed, and the reaction mechanism for structure change is also proposed. Fourier transform inferred spectroscopy and solid state nuclear magnetic resonance results show that the as-deposited film is an organic-inorganic hybrid film composed of various kinds of Si-O-Si, -CHx, Si-O-CH2CH3, etc. The organic component is removed almost completely during thermal annealing, making a porous film with a Si-O-Si inorganic skeleton. The skeleton is also rearranged at the same time. Deconvolution of the Si-O-Si absorption band of the FTIR spectrum reveals that the cage-like Si-O-Si occupies the major part for both as-deposited and annealed films, while the amount of silicon suboxide Si-O-Si decreases and that of network Si-O-Si increases during thermal annealing, making the film more robust. More C=C and Si-C are formed through chemical reactions between Si-H, -CHx and Si-O-CH2-CH3, and crosslinking is further enhanced. Nitrogen adsorption/desorption isothermal measurement reveals that a large number of micropores with diameter less than 2-3 nm are created during thermal annealing, which is consistent with the removal of organic groups and the existence of cage-like Si-O-Si. As a result, both the refractive index and dielectric constant decrease significantly from 1.476 (λ =630 nm) and 3.45 to 1.365 and 2.60, respectively. Because of the increase of C=C after annealing, extinction coefficient and leakage current density increase. Although there is a shrinkage of 14.7% in film thickness and a reduction of mechanical properties after annealing, the Young’s modulus is still larger than 4 GPa. Considering all kinds of properties, the obtained film appears to be a competitive candidate as inter layer dielectrics in the BEOL interconnect of integrated circuits.

Annealing Behavior and Hardness Enhancement of Amorphous Sicn Thin Films

The Effects of Extended Heat Treatment on Ni Induced Lateral Crystallization of Amorphous Silicon Thin Films

Nickel Induced Crystallization of Amorphous Silicon Thin Films

Thermochemical process occurring in PLD-derived SiC films during vacuum annealing

Structural Relaxation of Amorphous Silicon Carbide Thin Films in Thermal Annealing

Growth and Mechanical Properties of Amorphous and Nanostructured SiC films

High temperature annealing of hydrogenated amorphous silicon carbide thin films

Annealing Effect on Optical and Electronic Properties of Silicon Rich Amorphous Silicon-Carbide Films

Influence of annealing on microstructures and photoluminescence of nano-composite silicon film

Annealing effect on structures and luminescence of amorphous SiN films

OPTICAL AND ELECTRICAL PROPERTIES OF ANNEALING SiNx: H THIN FILM

Optimizing hardness of CN x thin films by dc magnetron sputtering and a statistical approach

Influence of Annealing Temperature on Thermal Stabilities of Hydrogenated Amorphous Carbon on Silicon Nitride Balls

Effects of Composition and Thermal Annealing on the Mechanical Properties of Silicon Oxycarbide Films

The Stability of Nitrogen-Containing Amorphous Carbon Films after Annealing at Moderate Temperatures

Effect of Annealing Temperature on the Formation of Silicides and the Surface Morphologies of PtSi Films

Modifying crystallinity and mechanical properties of (CoCrNi) 95.8 Ce 4.2 medium entropy alloy films by post-annealing treatment

Effects of Heat-Treatment on the Microstructure, Electromagnetic Wave Absorbing Properties, and Mechanical Properties of SiCN Fibers

Precipitation and Crystallization of Nanometer Si Clusters in Annealed Si-Rich Sio2 Films

Effect of Thermal Annealing on the Structure and Properties of Plasma Enhanced Chemical Vapor Deposited Sicoh Film

Effects of silicon content on the structure and mechanical properties of (AlCrTaTiZr)–Si<sub><i>x</i></sub>–N coatings by reactive RF magnetron sputtering